文档介绍：平面UV光固机
Fiat UV Curig Machine
使用说明书
Operation Instructions
制造编号:HCH-503-1162A
Seriai No.
昆山瑞达工业自动化设备有限公司
产品用途
Product Usage:
本产品主要用于对各种平面对象表面印刷后的UV油墨,胶水进行光固,
HCH-201 fiat UV machine is mainty used for the curing of printed UV
Inb on various surfaces such as bothlcs and cylindrical articles.
2、产品特点
Featnres
本产品采用封闭式结构、输送带传送方式,使用过程中,可根据对象大小和材技的不同,调整输送带速度和UV灯与对象的照射距离,以提高工件的光固效果。
Sealed structure and conveyor transmission are adopted in this machine. Moreover, of conveyor speed/disance detween substrateand UV lighi can be adjusted according to tue size and material ofsubstrate in use so as to optimize the curing result
产品底部装有风机,可随时将光固室内的热量排除,以延长灯管的使用寿命。
Heat in the chamber can be well let out through the excellent exhaust system at any time so that the lifetime of UV lamp can belengthened.
本机具有外形美丽、适用面广、光固效果好、质量可靠、使用安全、操作方便等优点。
Lt is a mschine with wdvantages such as reliable quality,superb curing result, beautiful appearamce, and easy as well as safeoperation.
3、技术参数
Basic Technical Date:
最大光固工件尺寸
Max Curing size
平面型:700*180mm(宽*高)
Flat: 700*180mm(w*h)
输送带速度范围
Conveyor speed Range
0-5m/min
调速方式
Speed Adjusting Methob
电子无级调速
Electronic stepless mode
总功率
Totai wattage
26KW
灯管功率
Lamp wattage
8kw*3
风机风率
Blower power supply
750w/220v*2
输送电机功率
Conveyormotorpower snpply
120w/1p/220v
外形尺寸
Dimensions
L3000*W850*H1750mm
电压表(ameter)
速度调节(.)
UV1定时器(UV1 timer)
UV1启动/停止(UV1 start/stop)
UV2定时器(UV2timer)
UV2启动/停止(UV2 start/stop)
电源指示()
工作指示(work indi cate)
电源开()
电源关()
温控仪(temperapure control)
V、使用方法
Operation Metlod
接通电源将输送带开关拨至开的位置,调速器旋扭调整运行速度,使输送带达到工作理想速度;
Turn on the power and start the conveyor,use the speed
Controller to achieve proper speed.
按下UV启动按钮,UV灯管点亮,灯管亮度逐渐加强,从点亮到工作状态有预热设置时间。在预热时间内,风机不工作,灯管功率切换不执行。
Press the UV START button to light the UV lamp,and it starts
resding finished,fan dose not work,and lamp power not witchblade.
预热时间完成,风机开始运转,进行抽