文档介绍：492Q型气缸盖双端面铣削
组合铣床总体设计
摘要
组合机床是以系列化、标准化的通用部件为基础,配以少量专用部件组成的专用机床。它适宜于在大批、大量生产中对一种或几种类似零件的一道或几道工序进行加工。组合机床可以对工件进行多面、多主轴加工,一般是半自动的。
本设计就是组合铣床的设计。其主要用在生产线上加工汽车的气缸盖的两端面。适合大批量的生产。
本设计中采用液压传动控制,在结构上要巧妙完成动作协调。用液压系统来提供动力,进而减少工作量,提高效率,也能减少人员损伤。
关键词:
组合铣床气缸盖液压系统
Abstract
Combine the tool machine is an in general use parts that turn, standardizes with the series for the foundation, going together with with the appropriation tool machine that a little amount appropriation parts is feat in in large quantity, mass production to a kind of or several category an or a few work preface of the spare parts carries on bine the tool machine can carry on to the work piece to face much, many principal axises process, is a half generally automatic.
This design is a design bine the machine bed. Its use primarily in the production on-line process the both ends of the automotive cylinder cover. In keeping with the production that large quantity measures.
The origin designs the medium adoption liquid to press to spread to move the control, wanting that the pletes the action on the structure the system to provide the motive with the liquid, then reduce the workload, lift high-efficiency, also can reduce the personnel to hurt.
Key words:
Combination machine bed The cylinder covers
The system of hydraulic pressure
目录
引言 4
1明确任务书,分析原始资料 6
............................................... 6
7
7
2 组合机床方案的制定 7
组合机床设计概述 7
组合机床的特点 8
组合机床的分类 8
组合机床发展方向 8
组合机床设计步骤: 9
确定工艺方案 10
10
配置型式的确定 10
结构方案确定 10
3 确定切削用量及选择*** 11
*** 11
12
12
,切削扭矩,切削功率 13
4 组合铣床总体设计 13
13
14
动力部件的选择 14
机床生产率计算 15
16
5 液压系统的设计 17
17
17
: 17
、速度图: 19
: 19
23
27
结论 29
致谢 30
参考文献 31
492Q型气缸盖双端面铣削
组合铣床总体设计