文档介绍：Tutorial 4: Feature Modification and Manipulation
Introduction
The ability to modify and manipulate features is important technique in Pro/E. In this
section, you will learn how to use the model tree to modify various aspects of a feature.
Feature Modification
1. Start Pro/E Wildfire.
2. Choose [File] -> [Open], and find Example2, the part designed in Tutorial 2.
3. Click [OK] Button.
4. First the part will be renamed. Right click on the branch labeled Protrusion on
the model tree at the left of the screen, as shown in Figure . The entire
part should be highlighted.
5. Select [Rename] from the menu.
[Figure ]
6. Enter [right_support] into the textbox, and hit Enter.
7. Next the dimensions of the part will be modified and a reference will be
added. Right click on the newly labeled RIGHT_SUPPORT branch, and select
Edit Definition.
1
8. Select the Sketcher icon on the dashboard, and select Sketch from the
Section menu. Pro/E will switch to Sketch Mode, and you will see the screen
shown in Figure .
[Figure ]
9. Select [Sketch] -> [Intent Manager] from the menu bar.
10. Select [Relations] from the SKETCHER menu on the Menu Manager.
11. Select [Add] from the RELATIONS menu. The screen will look like Figure .
12. You will now add a relation so that the dimension labeled sd1 is a functi