HGU管沟施工方案.doc

文档介绍：目录
1、 编制依据 1
1、 COMPILATION BASIS 1
2、 工程概况 1
2、 GENERAL 1
3、 施工准备 2
3. CONSTRUCTION PREPARATION 2
4、 施工计划部署 3
4. CONSTRUCTION PLAN ARRANGEMENT 3
5、 施工缝划分 9
5. DIVISION OF CONSTRUCTION JOINTS 9
6、 垫层及替代砼的浇筑 10
6. PLACING OF BEDDING CONCRETE AND CONSTITUTE CONCRETE 10
7、 脚手架工程 10
7、SCAFFOLD WORK 10
8、模板工程 14
模板情况介绍 14
Introduction of Formwork 14
廊道模板制作要求 14
Requirement for Pipeway Formwork Manufacturing 14
模板安装 14
模板拆除 15
Stripping of Formwork 16
9. 钢筋工程 16
钢筋材质及制作 16
Reinforcement Material and Fabrication 16
钢筋保护层 17
Cover of Reinforcement 17
钢筋连接 17
Reinforcement Connection 17
钢筋的防污染保护 18
Contamination Proof of Reinforcement 18
10、混凝土工程 18
11、质量保证 24
12、安全文明施工措施 25
13、计算书 26
HGU管沟施工方案
Construction Methods Statement On HGO
1、编制依据
1. Compilation Basis
台山核电站一期常规岛土建工程施工合同
Civil Work Contract of Taishan Nuclear Power Station Conventional Island(Phase 1);
欧标技术规格书(B版)
European Standard Technical Specification(Edition B)
HGU管沟施工图纸
Construction Drawings of HGU Pipeway
台山核电站一期常规岛土建工程现场施工情况
Civil Work On-site Construction Condition of Taishan Nuclear Power Station Conventional Island(Phase 1)
工程概况
2. General
台山核电站一期工程HGU管沟是连接循环水虹吸井(HCA)与重要厂用水泵房(HPA/C)专设的重要冷却水管沟。采用核岛反应堆坐标系(坐标以1980西安坐标系为准),反应堆厂房标高±(国家85高程系),所有标高都以反应堆厂房的相对标高为准;×,×,侧壁及底板、顶板均为500mm厚的现浇钢筋混凝土结构;结构需进行找坡,%、%%。HGU管沟替代砼及垫层采用C25砼,主体结构采用欧标C35/45砼;管沟共计10段(060~069段)。
In Taishan Nuclear Power Station project(Phase 1), HGU is essential cooling water pipeway which is dedicated to link the recycled water siphon well(HCA) and essential service pump station(HPA/C). Coordinate system of Nuclear Island reactor is applied(XI AN Coordinate System 1980). Level ± of reactor building corresponds to of National Elevation Datum 1985. All levels relate to the reference level of reactor building. The outside section of HGU is largely square hole of ×3