文档介绍：A9130BSC扩容方案
【扩容准备】
备份完整的BSC软件并且保存
确保BSC没有任何硬件告警,BSC状态为IDLE,和OMCR连接正常,没有MLPPP告警
具备WINBSC TERMINAL并且能够和BSC连接
扩容模块和备件准备
【扩容步骤】
操作BSS Audit Alarm State,
P板
Modify BSC Configuration:连接WINBSC mands -> BSC Extension/Reduction -> BSC Config Modify
In the ’Object Class’ field, select BSC
In the ’Unit Type’ field, select BSC
In the ’Unit Number’ field, enter 1
n the ’New Config BSC’ field, select the new BSC configuration number or
***** if you do not want to modify the BSC configuration.
In the ’Wait Period’ field, select the required wait period.
Click on [ OK ] to modify the BSC/TC configuration.
Following the BSC BSC-HW-RESYNCH message, the OMC-R automatically triggers a hardware and alarm audit. At the end of the audit, the new board must appear in the OMC-R