文档介绍：该【2014届上海市长宁区、嘉定区高三英语二模试卷及答案 】是由【1905133****】上传分享，文档一共【16】页，该文档可以免费在线阅读，需要了解更多关于【2014届上海市长宁区、嘉定区高三英语二模试卷及答案 】的内容，可以使用淘豆网的站内搜索功能，选择自己适合的文档，以下文字是截取该文章内的部分文字，如需要获得完整电子版，请下载此文档到您的设备，方便您编辑和打印。回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。Following parts of ordinary bolt connection: wall-beams, purlins, knee. Design of drainage, electrical, heating, ventilation, air conditioning, power should be subject to safety requirements for steel structures of other professions, it is forbidden to weld hanging load and increased roof and columns. Construction prepared and the construction layout first section material prepared and the processing production prepared according to Zhejiang more Palace steel limited and Wuhan intelligent elevator limited by signed of contract file and the Institute provides of steel design blueprint, I company and the Organization Technology Department, production department, procurement Department, bid do Engineering Department, related production sector for drawings triage, and according to owners requirements timely design out production and the processing detail and for has related professional sector of strictly triage, specific work process following: Bid do bid notice → Technology Department → add up do → procurement department → production department → quality Department → Engineering Department Technology Department production and the processing detail proposed Hou, by add up do coordination the sector of supporting work, and by figure line by varieties, and specifications, and quality for classified, and notification Procurement Department for material of market survey and procurement, by quality Department according to by purchased material of specifications varieties for quality review and test, not qualified of material varieties and specifications strongly ban for the engineering in the, After passing inspection informed the workshop of production of timber according to strict production details of production, workshop organized by the General Manager before the production technology and security sector technical safety training, safety education company to strictly three-level disclosure, training of qualified personnel is strictly prohibited to post production, production personnel must be listed to work, you must have the corresponding certificate. Road workers must have the certificate, and regular assessments should be carried out, not a skilled operator posts is strictly prohibited. Production of various items of equipment, appliances and other, non-professional is strictly prohibited actions and strict regulations, strong rewards, be eliminated. Production line set on person, title, responsibilities, and performance and safety comprehensive assessment. Material procurement process strictly handling the
回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。Following parts of ordinary bolt connection: wall-beams, purlins, knee. Design of drainage, electrical, heating, ventilation, air conditioning, power should be subject to safety requirements for steel structures of other professions, it is forbidden to weld hanging load and increased roof and columns. Construction prepared and the construction layout first section material prepared and the processing production prepared according to Zhejiang more Palace steel limited and Wuhan intelligent elevator limited by signed of contract file and the Institute provides of steel design blueprint, I company and the Organization Technology Department, production department, procurement Department, bid do Engineering Department, related production sector for drawings triage, and according to owners requirements timely design out production and the processing detail and for has related professional sector of strictly triage, specific work process following: Bid do bid notice → Technology Department → add up do → procurement department → production department → quality Department → Engineering Department Technology Department production and the processing detail proposed Hou, by add up do coordination the sector of supporting work, and by figure line by varieties, and specifications, and quality for classified, and notification Procurement Department for material of market survey and procurement, by quality Department according to by purchased material of specifications varieties for quality review and test, not qualified of material varieties and specifications strongly ban for the engineering in the, After passing inspection informed the workshop of production of timber according to strict production details of production, workshop organized by the General Manager before the production technology and security sector technical safety training, safety education company to strictly three-level disclosure, training of qualified personnel is strictly prohibited to post production, production personnel must be listed to work, you must have the corresponding certificate. Road workers must have the certificate, and regular assessments should be carried out, not a skilled operator posts is strictly prohibited. Production of various items of equipment, appliances and other, non-professional is strictly prohibited actions and strict regulations, strong rewards, be eliminated. Production line set on person, title, responsibilities, and performance and safety comprehensive assessment. Material procurement process strictly handling the
回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。高考试题库（）我的高考我做主！
回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。15
回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。Following parts of ordinary bolt connection: wall-beams, purlins, knee. Design of drainage, electrical, heating, ventilation, air conditioning, power should be subject to safety requirements for steel structures of other professions, it is forbidden to weld hanging load and increased roof and columns. Construction prepared and the construction layout first section material prepared and the processing production prepared according to Zhejiang more Palace steel limited and Wuhan intelligent elevator limited by signed of contract file and the Institute provides of steel design blueprint, I company and the Organization Technology Department, production department, procurement Department, bid do Engineering Department, related production sector for drawings triage, and according to owners requirements timely design out production and the processing detail and for has related professional sector of strictly triage, specific work process following: Bid do bid notice → Technology Department → add up do → procurement department → production department → quality Department → Engineering Department Technology Department production and the processing detail proposed Hou, by add up do coordination the sector of supporting work, and by figure line by varieties, and specifications, and quality for classified, and notification Procurement Department for material of market survey and procurement, by quality Department according to by purchased material of specifications varieties for quality review and test, not qualified of material varieties and specifications strongly ban for the engineering in the, After passing inspection informed the workshop of production of timber according to strict production details of production, workshop organized by the General Manager before the production technology and security sector technical safety training, safety education company to strictly three-level disclosure, training of qualified personnel is strictly prohibited to post production, production personnel must be listed to work, you must have the corresponding certificate. Road workers must have the certificate, and regular assessments should be carried out, not a skilled operator posts is strictly prohibited. Production of various items of equipment, appliances and other, non-professional is strictly prohibited actions and strict regulations, strong rewards, be eliminated. Production line set on person, title, responsibilities, and performance and safety comprehensive assessment. Material procurement process strictly handling the学优高考网（）我的高考我做主！
回填土应分层用蛙式打夯机夯实，每层填厚度不大于300mm，夯击次数不少于3-4遍。回填土的土质及含水量要符合规定过5cm筛网，以保证不含有大于5cm的土块进入基槽，切实保证设计要求，对于特殊部位电夯走不到之处用人力夯夯实，虚铺厚度不大于200mm，夯实次数不少于3-4遍。严格按设计图纸施工规范要求施工，基础垫层、承台、JL、DL、KL的钢筋种类、规格尺寸位置要准确，绑扎牢固，钢筋下垫同保护层厚度的水泥预制块，模板的位置，尺寸要准确，支撑要牢固，防止胀模或跑模，钢筋砼采用恒通商砼灰，振捣密实，振捣棒尽量要靠内侧插入，振捣深时，振捣棒与砼面成斜向插入，认真做到“快插不超过400mm，板每振完一段，随即用木抹子压实压平，表面不得有松散砼。我公司具备一支优秀的、经验丰富的钢筋施工队伍和设备齐全的钢筋加工机械及连接机械，在连接方面具备电弧焊、闪光对焊、电渣压力焊等较为先进的施工机具，在该工程中水平钢筋采用闪光对焊，竖向钢筋采用电渣压力焊。高考试题库（）我的高考我做主！
2014年长宁区、嘉定区高三英语教学质量检测试卷
第I卷（共103分）
I. Listening Comprehension
Section A
Directions: In Section A, you will hear ten short conversations between two speakers. At the end of each conversation, a question will be asked about what was said. The conversations and the questions will be spoken only once. After you hear a conversation and the question about it, read the four possible answers on your paper, and decide which one is the best answer to the question you have heard.
1.
A. At a paint store.
B. At a grocery store.
C. At a drugstore.
D. At a video game store.
2.
A. £40.
B. £60.
C. £120.
D. £180.
3.
A. He left the door open.
B. He broke the vase.
C. He took the vase off the table.
D. He turned out to be innocent.
4.
A. Judge and lawyer.
B. Policeman and driver.
C. Cleaner and walker.
D. Teacher and student.
5.
A. She’s got a full time job at the university.
B. She was surprised to get a full scholarship.
C. Everything went just as had been expected.
D. Brighton University is not her ideal school.
6.
A. The man has a serious sleep problem.
B. Neither of them has finished the paper.
C. They both had a hard time doing the paper.
D. The woman thought the paper easy to do.
7.
A. Help the woman find the building.
B. Follow the woman to the exhibit.
C. Assist the woman to read the map.
D. Show the woman where to get a new map.
8.
A. Mrs. Brown was unhappy this morning.
B. Mrs. Brown is a patient teacher.
C. Susan must be poor at her studies.
D. Susan might have been scolded by Mrs. Brown.
9.
A. She is going to try a new highway to the cinema.
B. She wants to go early to avoid a traffic j