文档介绍：Zebra 打印机的故障处理
Troubleshooting methods for the Zebra Printer
类别Type
故障表现Problems
故障处理Troubleshooting
无法开机
Unable switch on
检查电源, 电源插头处的保险管
Check the power, the fuse just near the power slot
白屏死机;
Machine dead with white screen
屏幕显示“Battery dead”
“Battery Dead”displayed on the Screen
无内存卡或卡坏;
no SRAM Card or Card broken;
更换内存卡电池;
Change the Card battery
打印机状态不对
The printer status is not good
( 无法Ready〕,Error 灯闪烁, 因为无纸、无色带等;
The status is not ready, Error light blink due to out of paper, out of ribbon;
因为无存储空间
Because of no memory space
重新校准;
Do the calibration again;
检查、调整测纸、测色带、测打印头温度、打印头开合等传感器;
Check, adjust the sensors for Label, Ribbon, Printhead temperature and Printhead Open/Close;
使用打印机参数设置命令中的校准指令;
Follow the calibratioh instructions in the Setting Menu, do the calibration again; (see note)
调整传感器的灵敏度; ( 参见备注〕
Adjust the sensitivity of sensor;
检查剩余存储空间的大小, 及需要下载的格式、图形文件的大小。注意:B 盘( 内存卡〕最大为1M,R 盘( 机器内存) 最大720K
Check the rest memory space, and the size of needed download format, graphic files;
Note: Max for B: is 1M,
Max for R: is 720K
打印质量不好
打印的标签整体较淡
设置参数中调整深浅;
Adjust the darkness in the settings;
Print quality is not good
打印的标签有个别行字体压缩
打印的深浅左右不一致
打印有不规律缺痕
纸和色带不配套;
The Media and Ribbon are not coupled well;
纸或色带安装不当,通道不畅;
Installation of Media or Ribbon is not good, the path is not smooth;
送纸不畅;
The Media is no