文档介绍:ELECTROPLATING BRIGHT OR LOW GLOSS DECORATIVE FINISH OVER ABS – EXTERIOR LOWTEMPERATURE WSS-M1P83-D2 APPLICATIONS电镀,高亮或低光泽装饰涂层的 ABS - 外观,低温的 WSS- M1P83- D2 应用ELECTROPLATING BRIGHT OR LOW GLOSS DECORATIVE FINISH OVER PC/ABS – EXTERIORHIGH TEMPERATURE WSS-M1P83-D3 APPLICATIONS电镀,高亮或低光泽装饰涂层的 PC / ABS - 外观,高温的 WSS- M1P83- D3 应用1. SCOPE 范围These specifications define the performance requirements for finished coatings of mechanically orchemically deposited electrical conductor coat and electrodeposited copper nickel and chromium forthe decoration and protection of acrylonitrile butadiene styrene ABS or polycarbonate/acrylonitrilebutadiene styrene PC/,化学沉积电导体和电沉积的铜,镍,和铬丙烯***- 丁二烯- 苯乙烯共聚物(ABS)或聚碳酸酯/丙烯***的涂装和保护- 丁二烯- 苯乙烯(PC / ABS)。2. APPLICATION 应用These specifications were released originally where a bright or low gloss decorative and/or protectivefinish is required for interior or exterior parts. Unless otherwise specified on the engineering drawing allparts shall be finished with a final coating of chromium. Two performance levels are defined as follows:这些规范被应用于高亮或低光泽装饰和/或保护涂层所需的内部或外部零件。除非工程图纸上另有指定,所有部分应完成最终的铬涂层。两种性能等级定义如下:WSS-M1P83-D2 Exterior applications – Low impact applications such as badges or in an operatingenvironment less than or equal to 82℃WSS-M1P83- D2 外部应用- 如徽章低冲击应用或在操作/工作环境小于或等于 82℃WSS-M1P83-D3 Exterior applications – High impact applications such as gr