文档介绍：设计题目:基于UG下的钢丝包装机的虚拟装配
学生姓名:
所在院系: 机电学院
所学专业:
导师姓名:
完成时间:
摘要
UG是现代计算机辅助设计中应用最广泛的先进三维软件,其功能十分强大。本文介绍了基于UG下的钢丝包装机各零件的造型过程,详细说明了在UG的装配模块对钢丝包装机各零件如滚动滑轮,轴,底座,面板,支架的虚拟装配并制作出工程图,根据装配图对设计的钢丝包装机各零件之间的关系进行检测,看是否存在干涉现象,进一步观察设计的钢丝包装机是否合理,从而提高了钢丝包装机设计的准确性和效率。
关键字: UG;参数化设计;三维造型;虚拟装配;工程图
Virtual Assembly and Movement Simulation
of Steel Wire Automatic Packaging Based on UG
Abstract:UG is in the puter-aided design applies the most widespread advanced three dimensional software, its function is very formidable. This article introduced based on the UG under steel wire packaging machine ponents' modelling process, explained in detail in the UG assembly module to the steel wire packaging machine ponents like gear, the rolling pulley, the axis, the foundation, support's hypothesized assembly and manufactures the engineering plat, carries on the examination according to the assembly drawing to between the design reduction gear ponents' relations, looked whether to have the interference, finally through the production steel wire packaging machine's movement simulation, further observes the design the reduction gear to be whether reasonable, thus enhanced the steel wire packaging machine design accuracy and the efficiency.
Key words: UG; Parametrization design; Three dimensional modelling; Hypothesized assembly; Engineering plat
目录
1 绪论 1
CAD的发展过程及现状 1
基于参数化设计的意义 2
背景及本文所做的工作 2
2 基于UG的钢丝包装机设计方案 3
最终模型图及工作原理 3
4
钢丝定位运动系统 4
钢丝的滚动运动系统 4
钢丝包装机零件的设计 5
5
6
,齿轮轴及带轴的三维模型设计 6
7
固定滑轮的三维模型设计 7
8
带的三维模型设计 8
8
9
包装带圆环的三维模型设计 9
面板的三维模型设计 10
11
11
12
钢丝包装机的装配 12
装配的概述 12
底座组件的装配 13
14
15
钢丝包装机的总装配 15
17
4结束语 18
致谢 19
参考文献 20
1 绪论
puter Aided Design)简称CAD,是以计算机为主要技术手段,