文档介绍：摘要
本次设计要对电池连接板进行工艺分析和模具设计,首先介绍了立项背景与设计主要技术条件及参数,然后介绍了设计的整体思路。第三章电池连接板模具设计是本次设计的重点,在这章里先对塑件进行了模流分析,各方面分析结果表示设计方案是可行的,然后对整套模具进行了全面的设计,最后对注射机的有关参数进行了校核,各个参数均能满足要求。
根据塑件结构特点,模具采用单分型面注塑模,一模二腔,利用斜导柱导出侧型芯,顶杆顶出塑件,能够满足实际中大批量生产,有很高的生产效率。
关键词: 电池连接板注塑模具模流分析一模二腔侧型芯
全套图纸,联系 153893706
Abstract
The author will analyze the process and design injection mold for the Cell Connector during the design. In this paper, the background of the project and main engineering parameters were introduced firstly, and then the whole idea was introduced. The designing injection mold for the connection block in the third section is the key of this paper. Firstly, the cell connector progress was analyzed by using mold-flow in this section and all the results are reasonable, then all parts of the injection mold were designed; at last, the parameters about the injection machine are reasonable.
According to the structure of the Cell connecter, the injection mold has one parting surfaces and two cavities. The side cores were derived by using the oblique guide column and the plastic parts were ejected by plunger. The mold is efficient in the processing.
Key words: Cell connecter injection mold mold-flow two cavities side core
目录
摘要┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈Ⅰ
Abstract ┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈Ⅱ
第1章绪论┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 1
立项背景┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 2
设计主要技术条件及参数┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 2
第2章总体设计思路及总体技术方案设计┈┈┈┈┈┈┈┈┈┈┈┈┈ 4
第3章电池连接板注塑模具设计┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 5
┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 5
┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 6
┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 7
对塑件进行网格划分┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 8
进行最佳浇口位置分析┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 9
塑件精度及公差确定┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 10
塑件体积及质量计算┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 10
单个塑件┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 10
四个塑件和浇注系统凝料┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 10
初选注塑成型机的型号和规格┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 11
确定型腔数量及排列方式┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 12
模具结构形式的确定┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 12
注射模详细设计┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 13
分型面位置的确定┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈ 13
确定浇注系统尺寸┈┈┈┈┈┈┈┈┈┈┈