文档介绍：PlateProcessor
VSP 85
T1790
This manual is for the daily users of the equipment.
Always read the Safety Instruction Manual part No 21741
before starting up the equipment and keep it with the machine for
reference at all times.
Edition B - October 1999 This book has part no. 51023-GB-A
-GB-
2 9941
-GB-
0. INTRODUCTION
IMPORTANT!
Approvals: Technical data:
• The processor is manufactured according to legal • Observe technical data from the processor name
demands. pliance with the requirements plate located on the rear panel of the processor.
the equipment is tested by Underwriters
Laboratories or other accredited authority.
• Approvals will appear from the labels attached to
the processor name plate or the frame part of the
processor.
Intended use of the equipment:
• Development of photographic materials as
specified in “TECHNICAL SPECIFICATIONS” in
Section 1 of the Service Manual.
Installation:
• Never install the processor in explosive
environments.
• It is the responsibility of the owner and
operator/s of this processor, that the installation
is made in accordance with local regulations, and
by engineers authorized to carry out plumbing
and electrical installations.
Installation, service and repair must be performed
only by service technicians who are trained in
servicing the equipment.
The installation procedure is described in
“INSTALLATION” in Section 2 of the Service
Manual.
• The manufacturer cannot be held responsible for
any damage caused by incorrect installation of
this processor.
9941 3
-GB-
THIS MANUAL
Intended use of this manual: Reservations:
• This manual is for the daily user of the • This manual was written and illustrated using the
equipment. best possible information available at the time of
• Always read the Safety Instruction Manual, publication.
part No 21741 before starting up the equipment • Any differences between this manual and the
and keep it with the machin