文档介绍：15–1
EXHAUST – EXHAUST PIPE ASSY
EXHAUST PIPE
1504H–01
COMPONENTS
Tail Pipe Assy
z Gasket
43 (440, 32)
Oxygen Sensor
44 (450, 33) 43 (440, 32)
Exhaust Pipe Assy Front
z Gasket
Floor Panel Brace Front
43 (440, 32)
30 (302, 22)
N·m (kgf·cm, ft·lbf) : Specified torque
z Non–reusable part
A65197
2004 COROLLA (RM1037U)
AuthorĂ: DateĂ: 1180
15–2
EXHAUST – EXHAUST PIPE ASSY
1504I–02
Removal & Installation and Disassembly & Reassembly
1. REMOVE OXYGEN SENSOR
(a) Remove a clip and tear off the floor mat.
(b) Disconnect a oxygen sensor connector.
A65195
(c) Remove the oxygen sensor.
A65198
2. REMOVE TAIL PIPE ASSY
(a) Remove 2 bolts, 2 springs and tail pipe assy.
3. REMOVE FLOOR PANEL BRACE FRONT
(a) Remove 2 nuts and the front floor panel brace front.
A54420
4. REMOVE EXHAUST PIPE ASSY FRONT
(a) Remove 2 bolts, 2 springs and exhaust pipe assy front.
5. INSTALL EXHAUST PIPE ASSY FRONT
(a) Using vernier calipers, measure the free length of pression spring.
Minimum length: mm ( in.)
HINT:
If the free length is less than minimum, replace pression spring.
(b) Install a new gasket on the exhaust manifold.
(c) Install the exhaust pipe front with 2 bolts and 2 springs.
Torque: 43 N⋅m (440 kgf⋅cm, 32 ft⋅lbf)
2004 COROLLA (RM1037U)
AuthorĂ: DateĂ: 1181
15–3
EXHAUST – EXHAUST PIPE ASSY
6. INSTALL FLOOR PANE