文档介绍:第 40 卷第 11 期
2010 年 11 月 Electric Welding Machine Nov. 2010
13%Cr 不锈钢的激光复合焊工艺
Lars-Erik Stridn
(伊萨焊接切割器材有限公司,哥德堡瑞典)
摘要:激光-MIG 复合电弧焊接工艺综合了激光焊接和电弧焊接的优点,具有低热输入( kJ/mm)、高
焊接速度(55~60 mm/s)、低变形等特点。应用在巴士和卡车底盘的马氏体不锈钢的焊接中取得了很好的
效果,通过实验证明,激光-MIG 复合焊的焊缝成形良好,接头力学性能、母材疲劳性能优越,其效率是
普通 MIG 焊接的 倍。
关键词:超级奥氏体不锈钢;激光复合焊
中图分类号: 文献标识码:A 文章编号:1001-2303(2010)11-0082-03
Laser-MIG hybrid arc welding process of 13%Cr stainless steel
专 Lars-Erik Stridn
题
讨(ESAB AB,Gothenburg Sweden)
论
Abstract:Laser-MIG hybrid arc welding process gives an overview of the advantages of both hybrid laser welding and arc
︱,
︱ process features low heat input ( kJ/mm) high welding speed (55~60 mm/s) and less welding performance has
激 been achieved in the welding of supermartensitic stainless steel materials for chassis of buses and welding profile is perfect
光 and very good anti-fatigue performance,with mechanical property of the joint superior to the base production efficiency is
焊 times pared with normal MIG welding.
接
切 Key words:supermartensitic stainless steel;laser-MIG hybrid arc welding
割
及
激 0 前言材。该材料强度高,耐腐蚀性能好,运输经济具有重
光要的环境特征,以上的特点就成了运输制造业的关
典型的超奥氏体不锈钢 w(Cr)=10%~13%,w(C)
焊键它同时涉及安全问题,降低质量,增加强度,以
缝≤%,w(Ni)=1%~6%。Ni 的作用是稳定马氏体。
便保证车内乘客和周围车辆的安全,是运输制造业
跟的微观组织,其化学成分如表 1 所示。这类材料的最
踪设计方案的