ABAQUS用户子程序.doc

文档介绍：ABAQUS用户子程序
ABAQUS/Standard subroutines:
: Define time-dependent, viscoplastic behavior (creep and swelling).
定义和时间相关的、粘塑性的运动(蠕变和膨胀)
2. DFLOW: Define nonuniform pore fluid velocity in a consolidation analysis.
在压实分析中,定义非均匀孔隙流速度
3. DFLUX: Define nonuniform distributed flux in a heat transfer or mass diffusion analysis.
在热传递和质量扩散分析中,定义非均匀的分布流量
4. DISP: Specify prescribed boundary conditions.
指定规定的边界条件
5. DLOAD: Specify nonuniform distributed loads.
指定非均匀的分布荷载
6. FILM: Define nonuniform film coefficient and associated sink temperatures for heat
transfer analysis.
对热传递分析指定非均匀的膜层散热系数和联合的散热器温度
7. FLOW: Define nonuniform seepage coefficient and associated sink pore pressure for
consolidation analysis.
对压实分析定义非均匀的渗流系数和渗入孔隙压力
8. FRIC: Define frictional behavior for contact surfaces.
对接触面定义摩擦
9. GAPCON: Define conductance between contact surfaces or nodes in a fully coupled
temperature-displacement analysis or pure heat transfer analysis.
在一个完全耦合的温度—置换分析或者是纯热传递分析中,定义接触面或节点间的导热系数。
10. GAPELECTR: Define electrical conductance between surfaces in a coupled
thermal-electrical analysis.
在耦合热电分析中,定义表面间的导电系数
11. HARDINI: Define initial equivalent plastic strain and initial backstress tensor.
定义初始等效应变和初始反应力张量
12. HETVAL: Provide internal heat generation in heat transfer analysis.
在热传递分析中提供初始热
13. MPC: Define multi-point constraints.
定