文档介绍：J I A N G S U U N I V E R S I T Y
本科毕业论文
混煤机结构优化设计
学院名称: 机械工程学院
专业班级:
学生姓名:
指导教师姓名:
指导教师职称: 讲师
2013年 6 月
混煤机结构优化设计
专业班级:机械0903 学生姓名:
指导老师: 职称:讲师
摘要: 宁钢五丰塘焦化厂供煤系统配置两台900t/h 双轴叶片式混煤机,自投入运行后,该混煤机多次发生断轴、端轴开裂等事故,造成生产中断,严重影响生产。本文通过对混煤机基本情况的了解和对混煤机结构的分析考察,采取了改变端轴连接结构,改变主轴端面结构提高主轴的强度和刚度等措施,从而改进混煤机设计缺陷。花键轴及相连减速机的零部件发生损坏的故障,通过对整体结构的分析,我们认为主要就是要增大主轴及其与端轴的整体刚度,保证端轴传递扭矩的具有足够的强度,消除端轴的径向摆动,让端轴只传递扭矩,保证减速机、端轴、及主轴尽可能轴线对中;本文设计的亮点就是在减速机与端轴之间增设联轴器,通过联轴器修正吸收来自负载的径向摆动。
关键词:混煤机主轴断裂结构连接优化设计
全套图纸,加153893706
Abstract
Ningbo iron and steel plant has two 900t/h double-shaft blade type coal mixer of the coal supply system .since put into operation, the mixed coal machine, multiple shaft broken end shaft cracking accident, causing production disruptions and the serious influence production. Based on the basic situation of coal mixing machine understanding and analysis of the coal mixer structure inspection, to change the link structure of axle end, change the spindle end structure improve the strength and stiffness of such measures, in order to improve the design of mixed coal machine defects. Spline shaft and connected reducer parts damaged fault, through the analysis of the whole structure, we think the key is to increase the spindle and shaft stiffness, securing sufficient strength of the shaft torque transmission, eliminate the radial swing axle end, that end shaft only transmitting torque, speed reducer, ensure the end axis, and the axis of spindle as bright spot is the coupling between the reducer and shaft, through the coupling correction absorption radial swing from the load.
Key words: Mixed coal machine Shaft fracture structural connection optimum design
目录
前言·······························································2
Abstract··························································3
第1章混煤机基本介绍············································6
························