1 / 50
文档名称:

毕业设计(论文)- 镁合金AZ31表面化学沉积MgF2磷酸钙复合涂层的研究.doc

格式:doc   页数:50
下载后只包含 1 个 DOC 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

毕业设计(论文)- 镁合金AZ31表面化学沉积MgF2磷酸钙复合涂层的研究.doc

上传人:3346389411 2013/10/9 文件大小:0 KB

下载得到文件列表

毕业设计(论文)- 镁合金AZ31表面化学沉积MgF2磷酸钙复合涂层的研究.doc

文档介绍

文档介绍:编号
毕业设计(论文)
题目镁合金AZ31表面化学沉积
MgF2/磷酸钙复合涂层的研究
二级学院材料科学与工程学院
专业材料科学与工程
班级
学生姓名
指导教师
评阅教师
时间
目录
摘要 I
Abstract II
1绪论 1
1
-P涂层复合材料 2
3
5
7
2实验 8
8
8
8
9
9
9
9
10
11
11
12
-电位曲线测量 14
14
3实验结果及分析 15
15
17
20
26
-电位曲线分析 28
30
4结论 34
致谢 35
参考文献 36
文献综述 39
摘要
近年来,镁合金在生物领域的研究和应用得到了广泛的关注。然而镁很容易发生化学反应,其合金通常耐蚀性较差。目前,表面改性是改善镁合金耐蚀性能的方法之一。
本实验首先采用氢氟酸处理镁合金,在其表面形成了一层不溶于水并具有导电性能的MgF2涂层。然后用电化学沉积的方法在处理好的样品表面制备Ca-P涂层。然后用扫描电镜观察试样表面形貌,采用EDS分析涂层成分,用电化学测试方法对样品进行耐腐蚀性能测试,并对涂层形成的过程和机理进行了分析。
实验结果表明镁合金经过HF预处理以后,采用电化学沉积的方法能够在其表面得到Ca-P涂层。但是在较高浓度HF处理后的试样上沉积效果更加明显。经过40%HF溶液处理后的样品涂层明显比经过10%、20%HF溶液处理后得到的涂层要厚。从电化学测试结果分析得出,40%HF处理后沉积得到的样品明显比其他试样更耐腐蚀。通过扫面电镜照片可以看出经过40%HF处理后沉积得到的Ca-P涂层结构疏松,不均匀,而20%、10%的样品上几乎看不到涂层,说明Ca-P涂层在MgF2表面沉积比较困难。
关键词:镁合金氢氟酸 Ca-P涂层腐蚀性能
Abstract
The use of magnesium alloy, in a variety of applications, particularly in aerospace, automobile, and mechanical and ponent industries, has increased steadily in recent years as magnesium alloys exhibit an bination of low density, high specific strength, excellent castability, and good mechanical and damping characteristics. The driving force also lies in the greatly improved affordability mercial magnesium alloy. Thus magnesium alloys show great potential. However, magnesium is intrinsically highly reactive and its alloys usually have relatively poor corrosion resistance, which is one of the main obstacles to the application of magnesium alloys in practical environments.
This paper mainly studies the MgF2 film is generated on the surface of magnesium alloy activated in the hydrofluoric the Ca-P coating prepared on the sample's surface by electro- change of the morphology, position and physical phase structure were investigated by mean