文档介绍：第 29 卷第 10 期中国给水排水 Vol. 29 No. 10
2013 年 5 月 CHINA WATER & WASTEWATER May 2013
设计经验
气水冲洗滤池工艺设计有关问题探讨
周文明1 , 胡亮亮1 , 徐世伟2 , 赵立佳1 , 吴旻旻1
( 1. 中国水电顾问集团华东勘测设计研究院, 浙江杭州 310014; 2. 浙江省天台县里石门水库
管理局, 浙江天台 317299)
摘要: 气水冲洗滤池( V 型滤池) 的设计、施工安装和运行管理技术已十分成熟,但有些设
计还存在一定问题,导致滤池调试麻烦、运行不正常、投资偏高,问题主要体现在滤池规模、滤速选
择、冲洗方式和阀门选择上,另外也可通过取消每格滤池小出水堰、控制滤池单边宽度、按流速选定
出水调节阀口径并适当减小一级或二级、扫洗孔中心标高宜稍高于排水槽堰口等,来确保滤池设计
的经济技术最优.
关键词: 气水冲洗滤池; 滤速选择; 冲洗方式; 扫洗孔标高
中图分类号: TU991 文献标识码: C 文章编号: 1000 - 4602( 2013) 10 - 0028 - 03
Discussion on Design Problems of Air-water Washing Filter
ZHOU Wen-ming1 , HU Liang-liang1 , XU Shi-wei2 , ZHAO Li-jia1 , WU Min-min1
(1. HydroChina Huadong Engineering Corporation, Hangzhou 310014, China; 2. Lishimen Reservoir
Administration Bureau of Tiantai County, Tiantai 317299, China)
Abstract: Although the design, construction and operation management of air-water washing filter
( V-filter) are already quite mature, some problems about choosing filter scale, filtration velocity, wash-
ing mode and valves still exist, causing troubles missioning, abnormal running and higher invest-
ment. It is ensured that the design of filter can achieve optimal economy and technology, by the methods
of canceling small effluent weir of each grid of filter, controlling unilateral width of filter, reducing one or
two levels of the effluent regulating valve s caliber se