文档介绍：基于GSM网络的远程家庭智能监控系统设计与实现
摘要
随着GSN网络的迅速普及移动通信技术的飞速发展,新技术和新业务的开发和应用已提到十分重要的位置。将GSM技术运用于实现家庭智能报警具有实际应用价值。
该系统以单片机AT89S52为核心作为控制模块,由GSM无线通信模块、传感器数据信息采集模块、液晶显示模块和报警模块组成。通过传感器模块中光电传感器和温度传感器采集相关信号,经A/D转换模块转换成单片机可处理的数字信号,经过语音报警模块发出相关报警信号,将该信号通过GSM短信模块,借助GSM移动网络,以中文短消息,直接把报警地点的情况反映到您的手机屏幕上。
该系统具有安全保密性高,又不需要组建专用网络和维护网络,网络覆盖面广,因此与传统的监控系统相比有着其独特的优势。
关键词:智能监控; AT89S52单片机;GSM网络;传感器;报警系统;
ABSTRACT
With the rapid popularization of works and the fast development of munication technology, new technologies and services have been stepped up to an all-important position . GSM technology will be applied to achieve practical application of intelligent alarm home value.
The system is MCU AT89S52 the core as a control module, which is consist of the GSM munication module, sensor data acquisition module, LCD module and alarm module. Photoelectric sensor module through the sensor and temperature sensor acquisition-related signals,through the A / D converter module into digital signals which a single chip can handle, after issuing the relevant alarm voice alarm module signals,the signal is through the GSM SMS module,with GSM work, through Chinese short message, directly to the alarm location is reflected to your mobile phone screen.
The theory is very simple and has high security, and there is no need to set up works and to maintain them, moreover the area of works covering is very wide, so this method has many particular advantages over conventional monitoring system.
Key Words:Intelligent monitoring; AT89S52 single chip puter;
works ;Sensor; Alarm system
目录
1 引言 1
2 方案选择及论证 3
方案1——基于8031单片机的防盗报警监控系统设计 3
方案2——基于GSM网络的远程家庭智能监控系统设计 4
3 系统硬件电路的设计 5
核心控制单元AT89S52模块——闪电存储型器件AT89S52 5
AT89S52单片机概述 6
AT89S52单片机特性 7
AT89S52引脚功能与封装 7
GSM无线通信模块——TC35i 10
AT指令说明 11
PDU编码规则 12
12
RS-232串行接口 12
传感器数据信息采集模块 16
17
21
液晶显示模块 22
方案1——采用LED液晶显示屏 22
方案2——采用点阵式数码