文档介绍：精品资料
本科毕业设计(论文)
题目:注射模二次顶出机构动画模拟
院(系): 材化学院
专业: 高分子材料与工程
班级: 090306
姓名:
学号:
指导教师:
2013年6月10日
本科毕业设计(论文)
题目:注射模二次顶出机构动画模拟
院(系): 材化学院
专业: 高分子材料与工程
班级: 090306
姓名:
学号:
指导教师:
2013年6月10日
注射模二次顶出机构动画模拟
摘要
模具在机械,电子等工业领域里,日益成为使用最广泛的工艺装备。动画仿真技术已广泛应用于各行各业,包括模具制造业,利用动画仿真能够把模具的开合过程及原理直观形象的表达出来,这对于我们的学习和研究有很大的帮助,对于模具的设计也具有非常重要的意义。本文是基于对注射模具二次顶出过程和装配过程的二维和三维动画模拟,特别是对注射模具二次顶出过程和装配过程的二维动画模拟。首先选取或设计适合二次顶出的塑件;其次利用制图软件CAD进行模具总装配图的绘制;再次利用flash软件进行二次顶出过程和装配过程的二维动画模拟;最后利用3dsmax软件进行实体建模及二次顶出过程和装配过程的三维动画模拟。用flash和3dsmax所制作的动画画面清晰,运动连续稳定,达到了演示其结构、工作原理的目的。
关键字:注射模;二次顶出;实体建模;flash;3dsmax;动画模拟
The animation simulation of secondary ejector
organization in injection mold
Abstract
Mold is increasingly ing the most widely used process equipment in the machinery, electronics and other industrial fields. Animated simulation technology has been widely used in all walks of life, including mold manufacturing. The use of animated simulation is able to express the opening, the closing and the principle of the mold process in visual image, which is helpful for our study and research, and also meaningful to the mold design. This article is based on the animation of secondary ejector process and assembly process of injection mold, especially the Two-dimensional animation of secondary ejector of injection mold. Firstly, CAD is used to draw the mold assemble drawing. Secondly, the Two-dimensional animation software of flash is used to animate the Two-dimensional animation. Thirdly, the parts and assemblies feature of proe which is most widely used in the machinery industry is used to create three-dimensional solid modeling and assembly. At last, the three-dimensional animation software of 3dsmax is used to create solid modeling and simulate the secondary ejector process and assembly process of injection mold. The animation produced by 3dsmax and flash has a clear picture,continuous and stable motion, ,which achieves the purpose of demonstrating its