文档介绍：BRITISH STANDARD BS5480:1990
Specification for
Glass reinforced
plastics (GRP) pipes,
joints and fittings for
use for water supply or
sewerage
UDC [ + ]::678-462::():/.8
Licensed Copy: Institute Of Technology Tallaght, of Technology, Thu Sep 14 11:16:08 BST 2006, Uncontrolled Copy, (c) BSI
BS5480:1990
Committees responsible for this
British Standard
The preparation of this British Standard was entrusted by the Plastics
Standards mittee (PLM/-) to mittee PLM/9, upon
which the following bodies were represented:
British Board of Agrément
British Gas plc
British Plastics Federation
British Plumbing Fittings Manufacturers’ Association
British Valve and Actuator Manufacturer’s Association
Department of the Environment (Building Research Establishment)
Department of the Environment (Construction Industries Directorate)
Department of the Environment (Property Services Agency)
Department of Transport
Electricity Supply Industry in England and Wales
Engineering Equipment and Materials Users’ Association
Health and Safety Executive
Institute of Building Control
Institution of Civil Engineers
Institution of Gas Engineers
Institution of Production Engineers
Institution of Water and Environmental Management
National Association of Plumbing, Heating and Mechanical Services Contractors
Plastics and Rubber Institute
Plastics Land Drainage Manufacturers’ Association
Royal Institute of Public Health and Hygiene
Society of British Gas Industries
Society of British Water Industries
panies Association
Water Research Centre
Water Services Association of England and Wales
The following bodies were also represented in the drafting of the standard,
through mittees and panels:
Association of Consulting Engineers
This British Standard, having Federation of Civil Engineering Contractors
been prepared under the Institution of Mechanical Engineers