文档介绍：NOT MEASUREMENT
SENSITIVE
MIL-HDBK-17-3F
Volume 3 of 5
17 JUNE 2002
Superseding
MIL-HDBK-17-3E
23 JANUARY 1997
DEPARTMENT OF DEFENSE
HANDBOOK
COMPOSITE MATERIALS HANDBOOK
VOLUME 3. POLYMER POSITES
MATERIALS USAGE, DESIGN, AND ANALYSIS
This handbook is for guidance only. Do not cite this document as a requirement.
AMSC N/A AREA CMPS
DISTRIBUTION STATEMENT A. Approved for public release; distribution unlimited.
Source: -- Downloaded: 2005-10-11T19:40Z
Check the source to verify that this is the current version before use.
MIL-HDBK-17-3F
Volume 3, Foreword / Table of Contents
FOREWORD
1. posite Materials Handbook Series, MIL-HDBK-17, are approved for use by all Departments
and Agencies of the Department of Defense.
2. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the con-
tractor does not have ply. This mandate is a DoD requirement only; it is not applicable to the
Federal Aviation Administration (FAA) or other government agencies.
3. Every effort has been made to reflect the latest information on polymer (organic), metal, and ceramic
composites. The handbook is continually reviewed and revised to ensure pleteness and cur-
rentness. Documentation for the secretariat should be directed to: Materials Sciences Corporation,
MIL-HDBK-17 Secretariat, 500 Office Center Drive, Suite 250, Fort Washington, PA 19034.
4. MIL-HDBK-17 provides guidelines and material properties for polymer (organic), metal, and ceramic
posite materials. The first three volumes of this handbook currently focus on, but are not
limited to, posites intended for aircraft and aerospace vehicles. Metal pos-
ites (MMC) and ceramic posites (CMC), including carbon-posites (C-C) are
covered in Volume 4 and Volume 5 , respectively.
5. This standardization handbook has be