文档介绍:注塑技术员用英语全攻略!.(1).(2):可分为***模,加热,射出,:moldopening/closing,heatinginjectionandknockingout.***模条件:Moldopeningparameter:快速段中速度低压高压速度High-speedmid-speedLowpressurehighpressurespeed锁模条件设定:Moldclosingparametersetting1锁模一般分:快速→中速→低压→高压Moldclosing:high-speed→low-speed→lowpressure→,如果是平面二板模具,快速锁模段可用较快速度,甚至于用到特快,当用到一般快速时,速度设到55-75%,完全平面模可设定到80-90%,如果用到特快就只能设定在45-55%,压力则可设定于50-75%,位置段视产品的深浅(或长短)不同,一般是开模宽度的1/-speedsection,–platemolditcansetquickandevenespeciallyquickusually,itsetspeedwithin55-75%.Forfull-platemolditsetspeedwithin80-90%whileusingespeciallyhighspeeditsetspeedwithin45-55%andpressurewithin50-75%positiondistancesettingdiffersdependingonthevolumeofproductandusuallyitcanbeset1/,在快速段结束后即转换成中速,中速的位置一般是到模板(包括三板模,二板模)合在一块为止,具体长度应视模板板间隔,速度一般设置在30%-50%间,压力则是20%-45%-speedsection:Moldclosingspeedchangesintomid-speedafterhigh--speedstartpositioniswheretwopl