文档介绍：2011届毕业生毕业论文(设计)
题目: 基于ADAMS的42吨集装箱叉车转向机构的仿真与优化设计
系别工程机械系
专业交通建设与装备
班级
学号
姓名
指导教师
二○一一年六月
摘要
本文介绍了42t集装箱叉车的转向机构采用由横置液压缸组成的一组六连杆机构,为了保证车轮转向时作纯滚动,需对六连杆机构优化设计。为了分析叉车的转向性能,采用ADAMS 软件对叉车的转向机构进行了建模仿真,测量了该转向机构的转角误差;实现了转向机构的参数化建模,以转向机构的累计转角误差最小为目标函数对转向机构进行了优化设计,并建立了叉车的整车模型,测量了叉车的外转向轮误差和整车模型的转向半径变化曲线,为分析叉车的转向性能提供了依据。并且以优化设计的结果为参数在ADAMS中建立叉车的整车模型,仿真结果证明优化设计的有效。
关键字:ADAMS;转向机构;仿真;优化设计
Abstract
This article describes the 42t container forklift steering hydraulic cylinder used by the tap of a posed of six-bar linkage, in order to ensure the steering wheel, made of pure rolling, the need for optimization of six-bar linkage design. To analyze the forklift's steering performance, the use of ADAMS, the steering mechanism on the truck the modeling and simulation, measuring the angle of the steering error; to achieve a steering mechanism of the parametric modeling, the steering angle error of the cumulative goal of minimizing function of the steering mechanism was optimized, and the establishment of a forklift vehicle model, measured outside the steering wheel forklift model error and the vehicle turning radius curve, analysis of the forklift's steering provided. And the results to optimize the design parameters to create the forklift vehicle ADAMS model, simulation results show that the effective optimal design.
朗读
显示对应的拉丁字符的拼音
字典
Key words: ADAMS;Steering system; simulation; Optimization design
目录
前言 1
1绪论 2
2
2
3
虚拟产品的开发流程 3
ADAMS软件的介绍 5
ADAMS软件的概述 5
ADAMS软件基本模块 7
ADAMS 仿真分析步骤 10
11
连杆机构的特点 11
42吨集装箱叉车转向机构的连杆机构 12
12
2利用ADAMS对叉车转向机构进行建模 14
14
14
14
15
16
16
17
保存模型 20
3转向机构的仿真 22
22
22
24
4叉车转向机构的优化设计 26
26
28
29
29
5创建整