文档介绍：天津职业技术师范大学 Tianjin University of Technology and Education 毕业设计基于 FPGA 的直接数字合成器设计二〇一二年六月天津职业技术师范大学本科生毕业设计基于 FPGA 的直接数字合成器设计 The d esign ofd irect digital frequency synthesizer based on FPGA 专业班级: 学生姓名: 指导教师: 学院:电子工程学院 II 2012 年6月 I 摘要直接数字合成( Direct Digita l Synthesis ) 技术采用全数字的合成方法。本设计结合了 EDA 技术和 DDS 技术, EDA 技术是现代电子设计技术的核心,是以电子系统设计为应用方向的电子产品自动化设计技术。 DDS 技术则是最为先进的频率合成技术, 所产生的信号具有频率分辨率高、频率切换速度快、频率切换时相位连续,输出相位噪声低和可以产生任意波形等诸多优点。本文在对现有 DDS 技术的大量文献调研的基础上,提出了符合 FPGA 结构的 DDS 设计方案,并利用 Quartus II 软件在 Cyclone II 系列器件上进行了实现,详细的介绍了本次设计的具体实现过程和方法,将现场可编程逻辑器件 FPGA 和 DDS 技术相结合,体现了基于 VHDL 语言的灵活设计和修改方式是对传统频率合成实现方法的一次重要改进。 FPGA 器件作为系统控制的核心, 其灵活的现场可更改性, 可再配置能力,对系统的各种改进非常方便,在不更改硬件电路的基础上还可以进一步提高系统的性能。文章给出的仿真结果,经过验证本设计能够达到其预期性能指标。关键词: 直接数字合成器;现场可编程逻辑门阵列;硬件描述语言 II III ABSTRACT The DDS technique adopts full digital synthesis methods. The bines EDA and DDS technology , EDA technology is the design of modern electronic technology at the core, electronic system design direction for the application of electronic design automation products technology. DDS technology is the most advanced frequency synthesizer technology. The generated signals have advantages of high frequency resolutions, fast frequency switching, continuous phase while frequency switching, low noise phase and being able to generate arbitrary waveforms. In this paper , after reviewing a lot of literatures published on DDS technology, DDS scheme based on FPGA structure are proposed, and then implemented in Cyclone II series FPGA using Quartus II tool . the paper introduced the concrete implementation process, this way associates DDS with field programmable gate array FPGA technology , the way based on VHDL is flexible in designing and modifying, which isa important innovation to the tradition synthesize way, FPGA device control core as system, its flexible scene can altering, can dispose ability again, very convenient to various kinds of improvement of the system, can also improve systematic performance further on the basis of alter