文档介绍：掘进机箱体加工工艺及组合机床设计
摘要
掘进机箱体是掘进机的重要零件。箱体的结构形式虽然多种多样,但仍有共同的
特点:形状复杂、壁薄且不均匀,内部呈腔形,加工部位多,加工难度大,既有精度
要求较高的孔系和平面,也有许多精度要求较低的紧固孔。因此,一般中型机床制造
厂用于箱体类零件的机械加工劳动量约占整个产品加工量的 15%~20%。这次的设计
内容就是掘进机箱体的加工及组合机床的设计。
用、方便、经济、合埋的加工上艺,并从中选扫两道上序进行夹具和组合机床的设计,
总的来说就是编排一套科学、方便、经济、合理的加上方案,加工出高质量的掘进机
箱体,并使其加上成本尽可能降到最低。
关键词:掘进机、箱体、孔系、组合机床、夹具。
- 1 -
Abstract
Roadheader is the important se se body parts of roadheader .
Enclosure structure form although varied, but still mon characteristics:
complex shape, wall thin and uneven, internal cavity shape, the machining parts is
more difficult, processing, have higher accuracy of the hole, and many peace
surface accuracy requirements of lower tighten holes. Therefore, general medium
machine tool factory for parts machining amount of whole product
manufactured accounts for 15% to 20%. This design content is roadheader box
processing bination machine tools design. According to the technical
requirements. Parts arrangement at a scientific and practical, convenience,
economy, and buried on the processing technique, and choose Saul sequence of
two way fixture bination machine tools design, overall is arranged a set of
scientific and convenient, economical and reasonable plus scheme, processing a
high quality roadheader , and make it possible to a minimum. Add cost
Keywords: roadheader, body, holes are, bination machine
tools and fixtures.
- 2 -
目录
摘要··················································Ⅰ
Abstract·····························································································Ⅱ
绪论···························································································&#