文档介绍：Reef Knot Bracelet Two metre pieces of jute or cotton string. 1. Make loops - 200mm from the core ends 2. Make first half knot 3. Second half knot opposite to the first, plete flat (square) knot. 4. Pull tight 5. Next half knot opposite to the last one, pull tight 6. Pass the core ends to the b ack and up through the loops. 7. Pull the core through the knot s, closing the loops to clamp the core ends. 8. Tie an overhand knot in the core ends to stop them pulling through 9. Continue with alternating half knot s, each opposite to the previous one, allowing the new loops (in the core) to come together to form the ring. Stop when the knotted band is long enough to make your bracelet. Check the length by putting together the ends of the knotted band. 10. Leave the last 4 knots loos e and thread the ends through before tightening.