文档介绍：106
106
106
YW 107
℃℃采用DN35mm导轨或螺钉固定安装
温湿度控制器 YW-HTC -20 ~60 108
0%~100%RH 盘面开孔尺寸:45mm×45mm
YWH 109
YWD 110
YWE 111

YWD 112
YWN 113
YWE 114
115
YW 116
105 上海涌纬自控成套设备有限公司

免费咨询热线:400-888-4838 106
YW

107 上海涌纬自控成套设备有限公司
Temperature and Humidity Controller
功能特点 Features 产品图 Picture
YW-HTC温湿度控制器采用PIC单片机制造,性能稳定、可靠性高。
可根据用户需要分别设置温度、湿度上下限告警值,具备LED指示灯及
接点输出功能。
采用数字式温湿度一体化测量探头
测量范围宽、精度高
结构设计合理,安装灵活方便
YW-HTC temperature and humidity controller are made of PIC Single
Chip Microprocessor, with stable performance and high reliability.
It can be set the upper and lower limits warning value of the
temperature, humidity according to the need, with LED indicator light
and the contact output
Digital temperature and humidity type to measure the probe.
Wide measuring range, high accuracy.
Reasonable Structural design and flexible installation
主要技术参数 Technical Parameters 功能菜单 Menu
测量范围温度(Temp.): -20℃~60℃功能菜单功能参数备注
Measuring Range 湿度(RH): 0%~100%RH Menu Description Remark
输出接点容量仅上限告警
5A / 220V H Upper Warning Only
Output Capacity 设置温度告警方式
仅下限告警默认:L (下限告警)
工频耐压 *1mA O To set temperature
C-HL L
Insulation Voltage (电源~输入间 Between Power~Input) warrning mode Lower Warning Only Default: L (Lower Warning)
功耗上下限告警
5A / 220V HL
Power Consumption Warning Both H & L
设置温度上限阀值取值范围: -40~80℃
辅助电源 O 默认:下限5℃,上限40℃
AC 220V C-H To set temp. upper value Range: -40~80℃
Power Supply Default: Lower 5℃,
设置温度下限阀值取值范围: -40~80℃
O Upper 40℃.
探头测量准确度与输入范围对应关系 C-L To set temp. lower value Range: -40~80℃
Accuracy and input range of the corresponding diagram 设置温度回差值取值范围: 0~20℃默认:5℃
OC-CB
To set hysteresis value Range: 0~20℃ Default: 5℃
仅上限告警
H Upper Warning Only
设置湿度告警方式
仅下限告警默认:L(下限告警)
rHHL
To set relative humidity L Lower Warning Only
warning mode Default: L (Lower Warning)
上下限告警
HL Warning Both H & L
设置湿度上限阀值取值范围:0~100℃
rH-H
To set RH upper value Range: 0~1