1 / 42
文档名称:

供暖锅的压力温度检测及PLC控制装置的设计.doc

格式:doc   大小:1,556KB   页数:42页
下载后只包含 1 个 DOC 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

供暖锅的压力温度检测及PLC控制装置的设计.doc

上传人:qiang19840906 2021/1/18 文件大小:1.52 MB

下载得到文件列表

供暖锅的压力温度检测及PLC控制装置的设计.doc

相关文档

文档介绍

文档介绍:毕业设计说明书
供暖锅的压力、温度检测及
PLC控制装置的设计
学 院:电气学院
专 业:电气工程及其自动化
学生姓名:
学 号:
指导教师:
2012 年 6 月
摘 要
本毕业设计是利用PLC控制供暖锅炉的各个电机,主要包括以下部分:鼓风机、引风机、炉排机、上煤机等电机的启停,并利用变频器来调整鼓风机的速度,从而达到了控制供暖锅炉的压力和温度的目的。本设计的PLC采用全自动的控制方法,同时具有测量、显示、数据处理和报警的功能。采用了变频器可以达到节约能源的目的,同时还有利于环保。PLC具有强大的数据处理功能,它也可以扩展多个模块,增加其输入/输出口。
通过温度、压力传感器将电流信号传送至EM235,它是一个模拟量输入/输出模块 ,它可以将电流信号送至PLC变为数字量,PLC将对这个信号进行处理,将处理后的结果送至EM235,EM235将模拟信号即电流信号传送至变频器进行调节。从而实现了对温度和压力的检测。
关键词: 供暖锅炉,变频器,PLC
Abstract
This subject is about the PLC control heating boiler control motor: blower, blower, grate, the coal machine motor start and stop, and controlled by frequency converter blower speed, thereby controlling the pressure and temperature of heating boiler. The design of the PLC using automatic control method, simultaneously with the measurement, display, data processing and alarm function. Converter with energy saving, environmental protection. PLC has a powerful function of data processing, it also can be extended to multiple modules, increasing the input / output port.
Using the temperature, pressure sensor to the current signal to the analog input / output module of EM235, the current signal is sent to the PLC into digital quantity, PLC on the signal processing, the processed results are sent to the EM235, EM235 analog signal is current signal is transmitted to the frequency regulator. To realize the temperature and pressure detection.
Key words: heating boiler, Frequency converter, PLC
目 录
摘 要 I
ABSTRACT(英文摘要) II
目 录 III
第一章 引 言 1
1
供暖锅炉的发展 1
第二章 设计内容及方案 3
设计内容 3
设计方案 4
第三章 变频器原理及其设置 6
西门子MM420变频器简介 6
变频器的调速原理 8
变频器参数设置 8
变频器的控制方式 9
第四章 控制设备的选型 10
PLC的选型 10
EM235简介 12
温度和压力传感器 15
TD200文本显示器 15
第五章 供暖锅炉控制系统硬件设计 18
主电路图 18
控制电路图 18
第六章 供暖锅炉控制系统软件设计 21
主要梯形图 21
主要指令表 25
结 论 27
参考文献 28
致 谢 29
附 录 30
第一章 引 言

以前的供