1 / 35
文档名称:

机械专业论文中英文对照word版.doc

格式:doc   大小:109KB   页数:35页
下载后只包含 1 个 DOC 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

机械专业论文中英文对照word版.doc

上传人:992006838 2021/2/25 文件大小:109 KB

下载得到文件列表

机械专业论文中英文对照word版.doc

文档介绍

文档介绍:Gearbox Noise
Correlation with Transmission Error and Influence of Bearing Preload
Doctoral Thesis in Machine Design
TRITA-MMK 2008:19
ISSN 1400-1179
ISRN/KTH/MMK/R-08/19-SE
Department of Machine Design
Royal institute of Technology
SE−100 44 Stockholm, Sweeden
© Mats Åkerblom 2008
ABSTRACT
The five appended papers all deal with gearbox noise and vibration. The first paper presents a review of previously published literature on gearbox noise and vibration.
The second paper describes a test rig that was specially designed and built for noise testing of gears. Finite element analysis was used to predict the dynamic properties of the test rig, and experimental modal analysis of the gearbox housing was used to verify the theoretical predictions of natural the third paper, the influence of gear finishing method and gear deviations on gearbox noise is investigated in what is primarily an experimental study. Eleven test gear pairs were manufactured using three different finishing methods. Transmission error, which is considered to be an important excitation mechanism for gear noise, was measured as well as predicted. The test rig was used to measure gearbox noise and vibration for the different test gear pairs. The measured noise and vibration levels were compared with the predicted and measured transmission error. Most of the experimental results can be interpreted in terms of measured and predicted transmission error. However, it
does not seem possible to identify one single parameter,such as measured peak-to-peak transmission error, that can be directly related to measured noise and vibration. The measurements also show that disassembly and reassembly of the gearbox with the same gear pair can change the levels of measured noise and vibration finding indicates that other factors besides the gears affect gear the fourth paper, the influence of bearing endplay or preload on gearbox noise and vibration is investig