文档介绍：70-1
Instrument panel
Instrument panel, removing and
installing
CAUTION!
Before working on the electrical system;
disconnect battery Ground (GND) strap.
Removing
Note:
Before disconnecting the battery, obtain radio
anti-theft code.
- Remove center console page 68-10 .
- Remove airbag unit driver side page 69-
38 .
- Remove hex head bolt -2- (60 Nm - must be replaced).
- Place steering wheel-1- in center position (wheels straight ahead).
- Remove steering wheel -1- from steering column.
70-2
- Unscrew two Phillips-head screws (arrows)
- Remove upper trim for steering column switch -1-
- Unscrew four Phillips-head screws (arrows)
- Unscrew inner hex head bolts -1-.
- Release height adjustment for steering wheel -2-.
- Remove lower trim for steering column switch -3-
70-3
- Loosen inner hex head bolt -1-.
- Remove connectors (arrows) from steering column switch.
- Remove steering column switch
- Pry off cover cap -1-
- Unscrew bolts -2- and -3-.
- Unclip lower A-pillar trim -4- from sill plate and remove.
70-4
- Unclip -1- cover.
- Unscrew bolts (arrows).
- Remove shelf driver side -2-.
- Remove connector from light switch -3- and from adjuster for automatic
vertical aim control system -4-.
- Slide cover -1- upward and secure with tooling aid (. screwdriver
handle) -2-.
- Remove four screws (arrows).
- Remove cover -3-.
70-5
- Remove two bolts (arrows)
- Remove instrument cluster.
- Disconnect connector.
- Remove two bolts (arrows)
70-6
For the removal of the radio use tool for radio 3316.
The unlocking tool for radio 3316 consists of two similar individual parts.
- Insert unlocking tool for radio 3316 in the slot (arrows) until it unlocks
70-7
- Remove radi