文档介绍:PSG EXHIBIT Revision Date: Professional Service Guide1 of2 INSPECTION REQUESTS All projects will require detailed pliance inspections during the construction phase. The disciplines normally include, but are not limited to, mechanical, electrical, plumbing, gas, fire suppression, and general building. The permit holder shall make all permits, drawings, specifications and change documents affecting codes available to the inspectors. Inspection personnel will be provided by the University or their designee. The State Fire Marshal ’s office is responsible for enforcing the Uniform Fire Safety Standards, including but not limited to the Life Safety Code, NFPA 101 (and other adopted NFPA codes) and must be contacted according to their requirements. The permit holder should fax (or email) the request form to schedule and inspection. The requestor shall be ready to provide the information required plete the Inspection Request/Report Form (attached). Inspection requests may be made by fax or by e-mail. The permit holder may indicate the time of day, in general, that the inspection is desired. The inspectors will try to modate these time-of-day requests, but it may not always be possible. Inspections will not be made on official holidays or weekends. In the event a code inspector cannot inspect the work when requested, the work must not be concealed. Work not inspected and approved