文档介绍：Sondu/Miriu Hydropower Project
Sang' oio Power Plant
Contract. No.
SDM08
Employer
KENGEN
Engineer
Nippon Koci Co.,Ltd.
Contractor
Sinohydro Corporation Ltd.
Document NQ.
MD-06-B2-05-004 (RI)
Pffi(s)
5
Dale
16th Mar 2011
OPERATION AND MAINTENANCE MANUAL
OF GENERATOR
(Lot AP-2)
RI
16A Mar 2011
1st Submission
REV.
PATE
PREPARED
CHECKED
ENPORSEP
APPROVED
Description
Format: A4
Operation of generator
Preparations before start-up, including:
Clean the work-yard and the generator set from any debris.
Check the tiglitelling condition, lock the gasket tightly, tack weld if necessary; keep the rotatable parts clean-
Check the inlet and outlet water pipelines, oil pipelines and valves, in order to know if there arc leakages and problems of water flow in the pipe.
Check the level of lubricating oil, oil number, oil quality, water pressure, and record the water temperature and ambient temperature.
Check each connecting cable, to make sure that the joints contact well and without rust, connection is right, and the marks arc complete and distinct.
Check if the equipments of high-pressure oil and the brake run normally, and if the brake pressure can meet the relevant requirements-
Check the fire extinguishing system and other protecting facilities, to ensure security-
Check the gaps between rotating parts and statio