文档介绍：2 ROUGHING-IN INSTALLATION -2- UNIT : mm K-19970T-UP 1200mm 1200mm A. Install Washbasin Install the services. Hot (H) and Cold (C) inlets must be connected to the correct inlet pipes. Install the drain in accordance with the manufacturer s instructions. We suggest using P-trap drain. Connect P-trap pipe with washbasin drain. Make sure a watertight seal exisits on all washbasin drain connections. Provide access to the plumbing connections for future plumbing maintenance. The hot and cold water supplies must be installed with isolating valves. Caution! Caution! A. (H) (C) P K-19969T-UP 900mm 900mm 458 900 420 420 458 1200 1 Kohler reserves the right to change marked dimensions without prior notice. Reference Value 1282865-T01-A -3- 3 UNIT : mm 1. 1. Mark the position of hanged bracket according to dimensions as illustrated, and loosen the suspension hook of washbasin . Avoid the cables and pipes inner set when drilling in the wall. Different types of bolts are required for different decoration boards. Please apply suitable bolts and plugs. Caution! Note: 20 20 900 570 458 280 20 20 1200 570 Wall Bracket Wall Bracket 2. 3. 2. Drill holes for fixing the bracket. Using a level, ensure that the hanged bracket is level. 3. Use suitable plugs and bolts, and fix the hanged bracket on the wall. 4 MAX1 2 1 3 4 1282865-T01-A -4- 4. 5. 4. Hang the washbasin on