文档介绍：安全与电磁兼容要求和安全措施
2

———————————————————————————————— 作者：
———————————————————————————————— 日期：

个人收集仅供参考学****勿做商业用途
Safety and EMC requirements and/or safety measures
平安与电磁兼容要求和平安措施
General
常规
For the application of EN 294, EN 457, EN 842, EN 953, EN 954-1 clause , prEN 1005-2, prEN 1005-3, EN 1837, EN 60204-1 the manufacturer shall carry out an adequate risk assessment for the requirements thereof where choice is necessary.
对于在EN 294，EN 457，EN 842，EN 953，EN 954-，耐点蚀当量 1005-2，耐点蚀当量 1005-3，EN 1837，EN 60204-1的应用制造商应当对其中必要的地方进展适当的风险评估。
NOTE This specific risk assessment is part of the general risk assessment relating to the hazards not covered by this “C〞 standard
注意这种特定的风险评估是有关的危害不受这种“C〞标准的常规风险评估中的一局部
Power driven parking equipment and systems shall comply with the safety requirements and/or protective measures of this clause. In addition, power driven parking equipment and systems shall be designed according to the principles of EN 292 for hazards which are relevant but not significant, which are not dealt with by this document (. sharp edges).
动力驱动的停车设备和系统应符合平安要求和保护措施的条款。此外,动力驱动的停车设备和系统应根据EN 292的原那么，对与还未处理的非显著性的危害(如锋利的边缘)的处理来设计。
Design criteria
设计标