文档介绍：一、前处理 *.sat 、*.x_t 等外部导入模型/facet,fine /replot Gui: Utility Menu>PlotCtrls>Style>Solid Model Facets ansys 背景 jpgprf , 500 , 100 ,1 /replot ,off /replot Gui: Utility Menu>PlotCtrls>Window Controls>Reset Window Options Utility Menu>PlotCtrls>Window Controls>Window Options TREF, TREF Gui : Main Menu>Solution>Define Loads>Settings>Reference Temp , Gui: Utility Menu>PlotCtrls>Style>Size and Shape 、体、面/TRLCY, Lab, TLEVEL, N1, N2, NINC Gui: Utility Menu>PlotCtrls>Style>Translucency , Label, KEY Gui: Utility Menu>PlotCtrls>Numbering hypermesh 有限元模型/input,filename,prp Gui: Utility Menu>File>Read Input from abaqus 格式的有限元模型/input,filename,inp Gui : Gui: Utility Menu>File>Read Input from 10. ansys 作为 fluent 前处理输出 cdwrite,db,filename,cdb gui: Main Menu>Preprocessor>Archive Model>Write 11. 不显示单元轮廓线/gline,1,-1 Gui: Utility Menu>PlotCtrls>Style>Edge Options 12. 显示施加到几何元素上的约束 dtran /replot Gui : Main Menu>Preprocessor>Loads>Define Loads>Operate>Transfer to FE>Constraints 13. 显示施加到几何元素上的面载荷 sftran /replot Gui: Main Menu>Preprocessor>Loads>Define Loads>Operate>Transfer to FE>Surface Loads 14. 显示载荷标记及数值/pbc,f,,2 Gui: Utility Menu>PlotCtrls>Symbols 15. 设置显示容差 BTOL, PTOL 默认值 PTOL 为 1e-5 ,可以根据需要修改 GUI: Main Menu>Preprocessor>Modeling>Operate>Booleans>Settings 16. 如何使用用户定义用户自定义矩阵 Matrix 27 用户定义用户自定义矩阵,由单元选项控制定义质量、刚度或阻尼