1 / 19
文档名称:

电路板pcb工程师英文eq.doc

格式:doc   大小:85KB   页数:19页
下载后只包含 1 个 DOC 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

电路板pcb工程师英文eq.doc

上传人:1006108867 2022/1/17 文件大小:85 KB

下载得到文件列表

电路板pcb工程师英文eq.doc

相关文档

文档介绍

文档介绍:. .
. v ,please confirm.
上图为我司建议叠构,请确认.
〔9〕问题:Your company have not provided the tolerance of board thickness,please confirm whether we could control it as +/-10%.
贵司没有提供板厚公差,+/-10%来管控.
. .
. v .
〔10〕问题:We can't find the finish copper thickness and solder mask color in spec ,please provide.
我们在说明书中找不到完成铜厚和防焊颜色,请提供.
建议:Finish copper thickness:1oz, SM color: matte green
完成铜厚1OZ 防焊颜色:哑光绿色
〔11〕问题:Please see Fig1,the number in gerber is different from "HIT-20-001200-001" in spec.
请看图一,gerber中的料号跟说明书中的"HIT-20-001200-001"不相符.
建议:We will ignore this difference and follow the gerber file to produce this board.
我们将忽略这个不同点,然后按照gerber来制作.
〔12〕问题:The customer requires use FR - 402 material, but we have not this kind of sheet material . 客户要求使用FR-402板材,但我们没有这种板材.
建议:We will use our common material production,Please confirm!Like KB6160 or equivalent instead of FR-402.
我们将使用常用的板材生产,-402.
〔13〕问题:In order to avoid the panel board scraped in process, we would like to change the sharp corner to round angle as .
为了防止板子在生产过程中刮花, 的角.
〔14〕问题:See below figure,50 Ohm impedance is controlled in the gerber, but
. .
. v .
the e-mail indicated that had no controlled impedance;Actually, the calculation also cannot reach 50 Ohm impedance values . 见以下图,gerber中要求做50ohm阻抗控制,但邮件中说明不用做阻抗控制。事实上也达不到50ohm阻抗值.
建议:Ignore the impedance control.
忽略阻抗控制.
〔15〕问题:There is no 60