文档介绍：...wd...
...wd...
电磁89/336/EEC并且依从EN55011和EN50082-2
0说明
Q-Sun是仿真产品在室外受到伤害的仪器.
主要是产品在室外受到外部环境的影响而有所退化.
退化包含:褪色,粉化,裂化,开裂,雾化,起泡,光泽,强度, 脆化.
用氙弧灯模拟阳光造成的伤害,用喷水模拟雨水和露水造成的伤害.
自动控制持续的光照,夜晚,喷水的时间和环绕.
Q-Sun Xe-3-H和HS可以控制相对湿度.
下面是Q-Sun所遵循的一些标准
ASTM C1442-Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM D1248-Polyethylene Plastic Extrusion Materials for Wire and Cable
ASTM D2565-Xenon Arc-Plastics for Outdoor Applications
ASTM D3424-Lightfashness of Printed Material
ASTM D3451-Testing Coating Powers
ASTM D3794-Testing Coil Coating
ASTM D4101-Polypropylene Plastic Injection and Extrusion Materials
ASTM D4303-Lightfastness of Artists’s Pigments
ASTM D4459-Xenon Arc-Plastics for Indoor Applications
ASTM D4798-Xenon Arc-Bituminous Materials
ASTM D5010-Testing Printing Inks$Related Materials
ASTM D5071-Xenon Arc-Exposure of Photodegradable Plastics
ASTM G151-General Guidelines for Exposure of Nonmetallic Materials
ASTM G155-Xenon Arc-Test Apparatus for Exposure of Nonmetallic Materials
...wd...
...wd...
...wd...
ISO 105-B02 Colorfastness to Artificial Weathering:Xenon Arc
ISO 11341 Paints-Xenon Arc
ISO 4892-2 Plastics-Methods of Exposure to Laboratory Light Sources-Parts 2:Xenon-Arc Sources
DIN 53 387-Artificial weathering and ageing of plastics and elastomers by exposure to filtered xenon arc radiation(Cycles A & E)
0安装
Q-Sun Xe-3
先剪断金属条,然后撤除四个镙丝
最小需要两个人去搬动仪器
搬起Q-Sun的一边,并把垫在下面的泡沫取出来
把机台从垫板上取下来
把仪器调整到平衡
将外壳上的胶带取下
Q-Sun Xe-1
先剪断金属条,然后撤除四个镙丝
最小需要两个人去搬动仪器
将外壳上的胶带取下
仪器必须在室内使用
电:
电压： Q-Sun Xe-1-B & Q-Sun Xe-1-S: 208V/230V±10%-单相电
Q-Sun Xe-3-B & Q-Sun Xe-3-S: 208V/230V±10%-单相电
Q-Sun Xe-3-H & Q-Sun Xe-3-HS: 208V/230V±10%-三相电