文档介绍:: .
.
.使用说mber and the serial
number. The number in the figure
means it is the No. 001 tester leaves
factory on 30th August 2008. The
edition of the tester’s software is Ver.
. Seconds later it goes into testing
as follow:
7P/N Type Battery capacity
Res. display
Parameter icon
Parameter value
1) parameter icon indicate
wafer’s thickness icon
calibrate icon
2) Parameter value display
It is the value of the parameter icon
display.
8The unit of the thickness is mm,
precision is .
Calibration range: 3000~6000
3) P/N Type display
Display the sample’s P/N Type.
4) Res. Display
Display the sample’s Res. value. The
unit of Res. is Ohm*cm.
Res. <, precision is
< Res. <1, precision is
Res.>1 precision is
c. Button operation
There are 4 touch buttons in button
9area. Function of button as follow:
1) power button
Long press it, the tester will turn off.
Or press it to turn on the tester.
2) plus button
To increases the parameter’s value
when press it in the set mode.
Long press, quickly increase.
3) set button
To switch the parameter icons is as
the same meaning to switch to set
different parameter.
4) minus button
10 : .
.
.使用说明书
.User Manual
硅材料迷你测试仪
Si Material mini Tester
型号(Model):Minihi
版本(Ver):
杭州晶翔电子科技有限公司
Hangzhou Jinsun Electronic Technology Ltd : .
.
.使用说明书