文档介绍：第2页 / 总页数 20 页
电磁铁使用说明书
目 录Index
1、基本原codeType code:DC lifting electromagnetMW 1辅助规格代号：“G”表示高温型派生代号基本规格代号，表示电磁铁超重能力（t）设计序号类组代号：起重电磁铁MW 1Subsidiary specifications code:“G”standsforhightemperaturetypeDerived codeBasic specification code:Mean the electromagnet excess ability（t）Series codeType code:lifting electromagnet注：MW1系列起重电磁铁散料型产品使用说明书同MW5系列。The MW1 series lifting electromagnet manual is the same as the MW5 series。 Usage and applicable range 用途 Usage 该系列电磁铁广泛应用于冶金、铸造、机械制造、交通运输等部门，与起重设备配套，作为装卸搬运生铁、废钢等铁磁性物料之用。 。
2欢迎下载
精品文档
This series electromagnet is widely applied to metallurgy, casting, machine manufacture, transportation and so no ,forming complete set with lifting equipment equipments to carry out loading and handling the magnetic material such as pig irons and scrap steel.
第4页 / 总页数 20 页
适用范围 Applicable range
本起重电磁铁适用于直流额定工作电压为220V，常温型起重电磁铁被吸物表面温度100℃以下，高温型起重电磁铁被吸物温度600℃以下。This lifting electromagnet is suitable to the direct current fixed working voltage is 220V, the normal temperature lifting electromagnet by the attached materials' surface temperature 100 ℃ below, high temperature lifting electromagnet ‘s the attached materials temperature is below 600 ℃ .
Structure and characteristic
结构 structure
起重电磁铁的磁路由钟盖、内外磁极、铁芯和被吸物构成。
The magnetic circuit of lifting electromagnet consists of bell cover, inner and outer magnetic pole, iron core and the held materials.
线圈放置在由钟盖、非磁性保护板构成的密封容器中，且用绝缘胶固定。 The magnetic coil will be put into airtight container made of bell cover, non-magnetic protecting plate with insulation rubber fixed. 整体采用焊接结构。
The whole framework uses the welding structure
第5页 / 总页数 20 页
高温电磁铁采用了双层辐射式特殊隔热结构。The high temperature electromagnet has used the double-decked radiation special heat insulation structure
潜水电磁铁整体采用气密试验后的焊接结构，出线盒进行了特殊的密封处理，出厂前进行了模拟试验。
The underwater type uses