文档介绍：…in which we have developed our knowledge and learn our skills.
恶劣气候下我们的施工设备经受了考验
整理ppt
NRS 公司的挂蓝，MSS造桥机，LG预制拼装系统以其
NRS AS
主框架
前后框架
底框架
横臂
内模
外模
底模
内模
整理ppt
前后工作车
主轨
液压油缸
The Bridgebuilder - Components
NRS AS
主框架
前后工作车
底框架
横梁
液压油缸
内模
外模
底模
内模
端模
工作平台
整理ppt
建桥者挂蓝
整理ppt
建桥者挂蓝施工程序:
挂蓝除内模部分移动到新的混凝土浇注位置。
调整外模，并将其固定。
底板及翼板钢筋绑扎
内模推进
顶板钢筋绑扎
底板及翼板混凝土浇注，顶板混凝土在间隔一定时间后浇注，也可在第二天浇注。
养护完成后张拉。
松开模板，推进挂蓝。多数情况下施工周期为1周，也有4-5天的实例。
NRS AS
整理ppt
用于小墩顶施工的建桥者
在墩顶长度仅为3米的情况下用挂蓝施工的方法。
3 m
第一步:
在3米长的墩顶上安装
整理ppt
建桥者用于小墩顶施工
When the pier head is too small to allow normal assembly of the Bridgebuilder, our patented Cross-member solves the problem. It makes it possible to start free cantilevering from pier heads as small as 3 m. The procedure is illustrated through the above 4 phases.
第二步:
在墩顶两侧浇注混凝土
整理ppt
建桥者用于小墩顶施工
When the pier head is too small to allow normal assembly of the Bridgebuilder, our patented Cross-member solves the problem. It makes it possible to start free cantilevering from pier heads as small as 3 m. The procedure is illustrated through the above 4 phases.
第三步:
将建桥者分开
整理ppt
建桥者用于小墩顶施工
When the pier head is too small to allow normal assembly of the Bridgebuilder, our patented Cross-member solves the problem. It makes it possible to start free cantilevering from pier heads as small as 3 m. The procedure is illustrated through the above 4 phases.
第三步:
将建桥者分开
整理ppt
建桥者用于小墩顶施工
When the pier head is too small to allow normal assembly of the Bridgebuilder, our patented Cross-member solves the problem. It makes it possible to start free cantilevering from pier heads as small as 3 m. The procedure is illustrated through the above 4 phases.
第四步:
完成12米墩顶混凝土，可进行标准挂蓝施工
整理ppt
建桥者用于小墩顶施工
When the pier head is too small to allow normal assembly of the Bridgebuilder, our p