文档介绍：大连工业大学艺术与信息工程学院 2015 届本科生毕业设计( 论文) I 摘要本文首先对右轴承座组件零件进行分析,通过对右轴承座组件进行的研究和分析,描述了它的毛坯制造形式、机械加工余量、基准选择、工序尺寸和毛坯尺寸的确定,以及切削用量和工时的计算等相关内容。为了提高劳动生产率,降低劳动强度,保证加工质量, 与指导老协商后,觉得用夹具比较合适。在这次毕业设计中,根据课题所给的零件图、技术要求,通过查阅相关资料和书籍, 了解和掌握了的机械加工工艺和编程的一般方法和步骤,并运用这些方法和步骤进行了右轴承座组件的机械加工工艺及夹具设计。整个设计的指导思想“简便、高效、经济”。力求生产处符合要求的产品。关键词: 右轴承座组件,加工工艺,夹紧,夹具大连工业大学艺术与信息工程学院 2015 届本科生毕业设计( 论文) II Abstract This design isa lather to e soon an appropriation for inside pulling out fork spare parts processing craft rules distance and some work prefaces tongs pull out the construction of the fork spare parts than plicacy, its the place that process isa peaceful in bore design processes after processing first the with flat surface the clear and definite dividing the line the bore the coarseness processes to process with the nicety the stage to guarantee their process the precise basis choice to pull out rough basis of conduct and actions of the biggest flat surface of the right in fork, process the in the center in general use bore, then be used as the precise basis with the bore that primarily work preface arrangement is first to process a flat surface with the center bore fixed position with the right side flat surface and below big bore of two flat surface, again with center bore the fixed position processes the big bore that carry processing is to use the boring machine boring these two bores as the basis finally, process the right-hand slot respectively with the thread bottom bore of the processes the process chose to use to the drill machine , miller with the boring machine .The tongs chooses to use the appropriation tongs, clipping tight way as to move to clip tight, clip tight and dependable, operation produce the efficiency higher, be applicable to the large quantity measures, the flowing water is on-line to satisfy the design request. Key words: Process the craft , F