文档介绍：硬度测量标准
type A shore durometer
type D shore durometer
Principle
A specified indenter is forced into the test ma硬度测量标准
type A shore durometer
type D shore durometer
Principle
A specified indenter is forced into the test material under specified conditions and the depth of penetration measured .
The indentation hardness is inversely related to the penetration and is dependent on the modulus of elasticity and the viscoelastic properties of the material .
Test
specimens
* The thickness of the test specimen shall be as least 4 mm.
* The dimensions of the test specimen shall be sufficient to permit measurements at least 9 mm away from any edge.
* The surface of the test specimen shall be flat.
Procedure
A short video about the operation process
Calibration
Apparatus for calibration of durometer spring
Question Time
Thank you
for your listening!
F=550+75HA
Used for softer materials
非 常 感 谢 您 的 收 看