文档介绍：美工刀使用安全演示文稿
第一页，共二十七页。
美工刀使用安全
第二页，共二十七页。
Always be sure that blades are properly seated in knives and that ，共二十七页。
Never leave a blade
Always retract the blade when not in use.
非使用状态时收回刀片
If knife and scissor is not used, Do not let it on your hand不在剪割物体时，不要将刀或剪刀在手中挥舞
第十五页，共二十七页。
When making cut-outs on rolls always pull the knife down. Never push it away from you.
总是刀片下滑，不要往外推
When using a knife to cut through thick materials, be patient - make several passes, cutting a little deeper into the material with each ，耐心－－慢慢划深
√
第十六页，共二十七页。
Practice 举例: QA/ cutting/ Finishing/ Sewing(Scissor)/ Wrapping
QA—Cut sample质量部－裁剪样品
Before Embossing
压花前修边
Air off －Before loading
烘干隧道－在上料前
Cutting－cut off the useless edge
裁切－修边
第十七页，共二十七页。
Task--Cut off the package tie 包装带切分
Solution—Use Scissors & other safer device用剪刀或其他安全工具代替美工刀
Notice: Place it in safe place放置在安全的地方
Task—Cut off and recycle the edge of big leather 裁切并回收利用大皮革的边角
Solution—The other free hand should keep 15cm away 另一只手至少保持15cm以上距离远，保证不受伤害。
第十八页，共二十七页。
Tips For Changing Blades & Needles 更换刀片和针头
Carefully remove the used blade from the knife.
小心地移开使用过的刀片
Always hold the blade at the non-sharp side.
总是抓住不锋利的刀片
Discard the used blade& Needle in a special box or other safe place. 丢弃用过的刀片&针头在专用盒内或其他安全部位。
Make sure to re-assemble the knife correctly. Make sure screw is tight. 确保正确重新组装刀片。确保螺丝拧紧。
废针储存盒
Waste Needle Storage box
第十九页，共二十七页。
事故回顾-leather-2007/11/23
涂饰员工在更换美工刀刀片的时候，用力过猛，加之没有佩戴防割手套，导致刀片将手指割伤。
第二十页，共二十七页。
更换刀片Change Blade
Employee was changing his blade, when other employee walk thru the same area
第二十一页，共二十七页。
Knife safe usage 美工刀的安全使用
尽可能避免使用美工刀，用其他工具代替。Avoid using such knives and replace with some safer device
车间主管对美工刀进行控制，确保发放授权培训合格员工，并对可使用的刀片数量做好日统计，并保存记录。Every supervisor needs to make control for all knives, which are used by authorized trained employee, in every area. Also, they need to have daily record for all the used blades.
每班结束后，