文档介绍：手动档驾驶口诀(Manual driving)
Manual driving tips
The engine throttle USES the key points
The throttle of a car engine is uving his foot on the clutch pedal for a long time, it is easy to cause the clutch skid, clutch plate ablation phenomenon, serious when even make the clutch pressure plate, a flywheel end surface ablation strain, resulting in failure of clutch compression spring annealing, etc. At the same time, it will also cause the cost of fuel, cost and driving.
Start with the right operation. At the beginning, the operation of the clutch treads is one fast, two slow, three linkage. That is to lift when the pedals lift: When the clutch comes in half gear (the engine's voice changes), the pedal is slightly slower: The pedal is slowly raised by the process of linkage to complete integration. When the clutch pedal is raised, step on the gas pedal according to the resistance of the engine to make the car start smoothly.
The correct operation of gear shift. When changing gear in the driving, the control of the clutch pedal should quickly step down and raise, do not appear half linkage phenomenon, otherwise, will accelerate the wear of the clutch. In addition, you should pay attention to the throttle when you operate. In order to reduce the wear of gear shift gear and clutch, a two-foot clutch shift is advocated. Although this method is more complicated, it is a good way to sav