文档介绍：: .
3. REQUIREMENTS
The primary intent of this Standard is to control restricted substances within formed articles.
However, it should be noted that non-dimensional materials (., chemicals) and articles which
are intrinsically hazardous, or which form or release hazardous substances during use, recycling
or disposal, are subject to separate detailed evaluation and clearance by Ford. This clearance
must be completed prior to supply of product to Ford. Details of any brand-specific direction and
this process can be obtained by contacting the appropriate regional Toxicology office (see
Appendix 2).
Date Action Revisions
2002 02 18 Revised Revised & updated E. Rezendes
2001 02 15 Revised Revised & updated E. Rezendes
1984 01 11 Activated
Printed copies are uncontrolled Page 1 of 28
Copyright © 2002, Ford Global Technologies, MATERIAL SPECIFICATION
WSS-M99P9999-A1
Section relates to general requirements affecting all product supplied to Ford. Individual
restricted substances are alphabetically listed, with the type of restriction indicated, in Table 1,
and are also referred to indirectly on a hazardous properties basis in .
It is the duty of all Suppliers of product to Ford to comply with this Restricted Substance
Management Standard.
ALL PRODUCTS
Paragraph deleted