ANSYS经典-练习6实体建模-自上而下.pdf

文档介绍：: .
INTRODUCTION TO
1. 按教师指定的工作目录，用“p-block”作为作业名， 进入 ANSYS
2. 打开等视图方位:
– Utility Menu > PlotCtrls > Pan, Zoom, Rotate …
• 按[ISO]
或用命令
– :
/VIEW,1,1,1,1
3. 创建轴承座的基础 :
– Main Menu > Preprocessor > -Modeling- Create > -Volumes- Block > By Dimensions ...
• 输入 X1 = 0, X2 = 3, Y1 = 0, Y2 = 1, Z1 = 0, Z2 = 3,然后按[OK]
或用命令
– :
/PREP7
BLOCK,0,3,0,1,0,3
-
Part 1 Part
January 30, 2001
Inventory #001442
W6-36. 实体建模：自上而下
轴承座 专题 Supplement
INTRODUCTION TO
3. 将工作平面移到位置 X=, Y=, Z=.75:
– Utility Menu > WorkPlane > Offset WP by Increments …
• 设置 X,Y,Z Offsets = , ,
• 设置XY, YZ, ZX Angles = 0, -90, 0, 然后按 [OK]
或用命令
– :
WPOFF, , ,
WPROT, 0, -90, 0
-