文档介绍:嵌入式软核的Linux操作系统应用研究
电路与系统, 2011, 硕士
【摘要】随着计算机技术的发展,嵌入式系统已经广泛应用到工业控制、信息家电、机电产品等众多领域。其中大多数应用都是基于ARM、Power PC、MIPS等硬核处理器,虽然技术比较成熟,但其生产成本较高,设计灵活性较差,产品一旦完成便不易升级。因此,本文主要研究基于Nios II软核处理器的嵌入式系统应用。Nios II是Altera公司为实现SOPC(System On a Programmable Chip,片上可编程系统)技术而设计的第二代FPGA(Field Programmable Gate Array,现场可编程门阵列)嵌入式处理器,它以软核的形式在FPGA中实现,具有高度的灵活性和可配置性。Linux操作系统作为开源、免费的自由软件,具有高效、稳定、可裁剪、支持多种硬件设备等特点在嵌入式系统中得到了广泛的应用,uClinux是Linux操作系统的一个嵌入式版本。本课题重点讨论嵌入式uClinux操作系统在Nios II软核处理器上的移植过程及应用。本文以EP2C35F484C8 FPGA芯片为核心,首先,研究了基于Nios II嵌入式处理器的软件架构,利用SOPC Builder开发... 更多还原
【Abstract】 With the development puter technology, Embedded System has been widely applied to Industrial Control, Information Appliance, Mechanical & Electrical Products, etc. Most applications are based on ARM, Power PC, MIPS and other hardcore processors, although its technology is more mature, the cost is higher and design flexibility is poorer, productions are not easy to upgrade pleted. Therefore, this thesis mainly studies embedded system application based on the Nios II soft-core pr... 更多还原
【关键词】嵌入式系统; Nios II; SOPC; FPGA; Linux/uClinux; 图形用户界面;
【Key words】 Embedded System; Nios II; SOPC; FPGA; Linux/uClinux; GUI;
摘要 3-4
Abstract 4
第一章绪论 7-10
引言 7
研究现状和发展方向 7-8
论文主要工作 8-10
第二章系统方案设计 10-18
嵌入式系统概述 10-14
嵌入式系统的发展 10
嵌入式系统的特点 10-12
嵌入式系统的组成 12-13
嵌入式Linux 操作系统