文档介绍：数控卧式车床CK6136液压尾座设计
摘要:本课题研究的主要目的是设计出与CK6136卧式数控车床相匹配的液压尾座系统,本课题将以其尾座为研究对象,设计出符合该车床的液压尾座。
为了完成本课题的设计,在设计之前的准备工作必须做好,首先是搜集和分析资料,主要包括国内外数控机床的发展现状;液压技术和液压传动系统的基本资料;同等机床液压尾座的图纸和资料等。其次是初步确定液压尾座的总体布局,包括配置形式、液压系统的布置及选择液压能源及相应的配套元件等。最后主要是关于尾座的设计计算。
CK6136数控机床变档卡紧及尾座顶紧的控制方式基本上是手工控制,在通常的加工过程中,需先用手工控制的方式完成变档和卡紧工作,然后再进行装夹,在装夹完毕后还需要使用手工控制的方式完成尾座的顶紧工作。由此可知,在数控机床的加工作效率效率并不高,而且工人劳动强度大,耗时又耗力,还会增加企业成本。因此,本课题研究所要达到的预期效果是在CK6136数控车床加工过程中,当需要使用尾座时,使用本课题所设计的尾座可以提高加工过程的机械化和自动化水平,提高生产效率,降低工人的劳动强度,降低企业成本。
关键词:数控机床尾座液压系统液压缸设计校核
The design of C machine Tailstock Hydraulic system
Abstract:The main purpose of the research is based on C machine tools to design requirements, designed to match its hydraulic Tailstock to meet the rotation accuracy, rigidity, temperature rise, and so on seismic requirements, to enhance the overall performance of machine tools.
   To plish this design, I collected and analysed the information before the design, including domestic and international development C machine tools; hydraulic system of hydraulic technology and the basic information; equal hydraulic machine Tailstock the drawings and information . Then is tentatively determined the overall layout of hydraulic Tailstock, including the allocation of form, layout and the hydraulic system of hydraulic energy, and select the appropriate ponents, such as. This was followed by the main Tailstock the design and calculation.
C machine tools changed file cards bear and Tailstock top tight is basically manual control, in the conventional process, the change required manual card file and clamping a tight and then again after the fixture also need to use a manual Tailstock The top tight. Therefore, in the process C machine tools in efficiency is not high, workers in labor intensity and great. Therefore, the issue of the Institute to achieve the desired results in the CK
C lathe processing, when the need to use Tailstock, the use of this issue by the Tailstock design can improve the process of mechanization and au