文档介绍:·机械研究与应用· 年第期第卷总第期应用与试验
2016 6 ( 29 , 146 )
doi:10. 16576 / j. cnki. 1007-4414. 2016. 06. 037
基于 SolidWorks 的展开放样技术在压力容器制造中的应用∗
张涛,姚金杉
(兰州兰石重型装备股份有限公司,甘肃兰州)
730314
摘要:分析了压力容器中各类异型板卷式筒体、接管常用加工制作方法及特点,介绍了基于展开放样技
SolidWorks
术在压力容器中各类异型板卷式筒体、接管加工制作过程中的应用,并通过实际应用验证了该方法的可行性及优点。
关键词:压力容器;展开放样; ;接管
SolidWorks
中图分类号: 文献标志码: 文章编号: ( )
TE968 A 1007-4414 2016 06-0123-02
Application of Lofting Technology in Manufacturing of Pressure Vessel Based on SolidWorks
,
ZHANG Tao YAO Jin-shan
(Lanzhou LS Heavy Equipment Corporation Ltd, Lanzhou Gansu 730314, China)
Abstract: ,
In this article mon manufacturing methods and characteristics of various special-shaped plate roll barrels
and connected pipes of the pressure vessels are analyzed. The application of the Solidworks lofting technology in the manufac-
turing process of pressure vessels like various special-shaped plate roll barrels and connected pipes is introduced. And finally
the feasibility and advantages of this method are verified through practical application.
Key words: ; ; ;
pressure vessel lofting SolidWorks connected pipes
0 引言格式在独立的文件下就可以对展开图中的相贯线
, ,
压力容器产品中接管与筒体为典型异径相交筒的展开曲线进行编辑并获得该曲线的相关属性从而
,
体结构接管与筒体相交有正交斜交偏心等多种形指导板料下料的生产实践
, 、、。
式一般压力容器制造企业对此类板材卷制接管制 2 建立模型与展开放样
。
作有两种解决方法一种是接管卷制成型后与筒体进 2 1 特征建模
, .
行演装划相贯线然后进行气割打磨贴合这种工作首先根据零部件及接管与筒体装配尺寸建立待
, 、,
法最大的特点就是工作量大另