文档介绍：Mechanism and Machine Theory 44 (2009) 813–821
Contents lists available at ScienceDirect
Mechanism and Machine Theory
journal homepage: ate/mechmt
From transmission error measurement to pulley–belt slip determination
in serpentine belt drives: Influence of tensioner and belt characteristics
Lionel Manin a,*, Guilhem Michon b, Didier Remond a, Régis Dufour a
a LaMCoS, RS 5259, INSA-Lyon, 18 rue des Sciences, 69621 Villeurbanne, France
b Université de Toulouse, ISAE-DMSM, 10 Avenue Edouard Belin, 31055 Toulouse, France
article info abstract
Article history: Serpentine belt drives are often used in front end accessory drive of automotive engine. The
Received 4 September 2007 accessories resistant torques are getting higher within new technological innovations as
Received in revised form 9 April 2008 stater-alternator, and belt transmissions are always asked for higher capacity. Two kind
Accepted 14 April 2008
of tensioners are used to maintain minimum tension that insure power transmission and
Available online 23 May 2008
minimize slip: dry friction or hydraulic tensioners. An experimental device and a specific
transmission error measurement method have been used to evaluate the performances
of a generic transmission by determining the pulley–belt slip for these two kinds of ten-
Keywords:
sioner. Transmission error between pulleys, pulley/belt slip are d